XRSS267BB (PXRSS267BB0) Amana Refrigerator - Instructions

Replace the Auger & Crusher blade. Very easy to do and it works great now. Also, your customer service was great!! shipped the same day and arrived to me the next day!!

I am completely satisfied with PartSelect Appliance Parts. I had a broken vegetable drawer in my Amana refrigerator and had delayed fixing it because I thought it would be difficult. Finally I got the model number from the door sticker and Googled it for where I could find the part. PartSelect came up and I was amazed at how easy it was to locate the correct replacement item and how easy it was to place the order. Then much to my amazement, the part arrived in 2 days and in perfect condition because it was shipped with all precautions against damage. I removed the broken drawer, pushed in the new drawer and voila! All good. I highly recommend PartSelect Appliances for their user friendly web site, their ease of ordering and their super fast shipping. Thank you!!

pulled the old one out and slid the new one in. Even I did this right. If I can do it anyone can do it. The only thing I worried about was if I ordered the wrong Crisper Pan.

I watched the online video and followed the directions. The only thing that was not obvious (and this is where the video saved several minutes)was how to remove the upper part from the door. This repair makes the door seals much more effective and should reduce the compressor run time. I have to compliment you on your prices and speed in getting the parts to me...great service!

First My Frig side of the double door unit wasn't closing on its own. Kids don't look, so they walk away...next thing you know the frig warms up and the freezer starts to frost up from running so long...Now it won't shut off.... I checked the hinge and sure enough it was wore down. Now mind you, I ordered a hinge kit first without checking to see what type I needed...don't do that...Less than 15 mins you can take the door off and see which one you need.As soon as I saw which type of hinge set I needed I went and ordered it...returned the other one. It came pretty quick.... 15 mins had that sucker changed and working... But... the door still wouldn't close on its own... Common sense told me the heat from the frosted freezer caused the door and frig walls to swell... Yes I said the heat... When the component in the freezer frosts up it does not keep the frig cool, nor will the freezer stay kool... the frost prevents the cool air from moving around...thus "HEAT".... It took a full 24 hrs for my frig n freezer to get back to normal... and now the door closes just fine... MIND YOU! I had to take the covers off the freezer unit inside, then take a steamer and melt all that frost off of every inch including down the drain... That took me a good 5-6 hours... and what a mess.... but it was worth my time.... because I don't have to replace my second hand Jenn-Air which I could never afford to buy brand new.... Whew....what we have to do to keep things going... $11 bucks worth of parts.... "Super Mom" :o)

removed the broken bin, which was extrememely easy and set in the new one, equally as easy. The telephone staff were extremely helpful, and courteous, especially John, who took a great amount of time helping me find the correct part. Thank all of you.

The DIY video was very handy and precise to every visual detail needed for anyone to do their very own repair. It doesn't get any better than that.

Remove plastic hinge cover (phillips screwdriver). With door closed, remove ground wire (phillips screwdriver). Remove broken hinge (nut driver). Route wires through split in hinge body. Route wire through new hinge body. Install new hinge (nut driver). Install ground wire. Install plastic cover. Entire job took less than five minutes.

Put the new one in its place easy

Simply replaced cover by hand. No tools required.

Ordered the correct replacement part (Icemaker Auger and Crusher Blade Assembly) as found here at PartSelect.com. Part was delivered within two days. Removed two screws to remove the old assembly; inserted new assembly, replaced the screws and problem fixed. Couldn't be easier.

Removed old auger unit by removing two screws - installed new auger unit by replacing the two screws. Easy schmeasy!

1.Lift out the ice bucket. 2.Remove two screws at bottom. 3. Remove front (made up from parts 20 and 21 in diagram by lifting the plastic flanges at the bottom and sliding it off upwards. Fingers were adequate to lift the flanges. 4. Remove the mechanism. It comes right out. 5. Slide the mechanism into the new bucket. 6. Put the front onto the new bucket by sliding down and lifting the flanges over the ridge at the bottom of the bucket. 7. Put the two screws in at the bottom. 8. Slide the bucket back into the freezer. This was the easiest repair I have ever done.

Very easy repair just follow the instructions provided here

take the front off the ice maker. take the bar out. then replace the helix end cap. then put the bar back and the front.