XRSS264BW (PXRS264BW0) Amana Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Robert from Bakersfield, CA
- Parts Used:
- WP12740302
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The ice crusher quit working
Removed the old one put in a new one, fairly simple. Would have been much easier if I had called the manufacturer first then ordered the part. The first part I ordered was the ice bucket, I thought I was getting the crusher mechanism, but it turned out to be the bucket only. When I finally got the right part it was really easy. I went ahead and kept the new bucket anyway.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kent from fishers, IN
- Parts Used:
- R0181181
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Refrigerator door side lower closer cam broke
The worst part was unloading the door shelves. Removed upper hinge cover and hinge hex screws. This allows the door to be removed. Lay the door on side. Remove screw that holds cam in place. Replace
broken cam with new piece. Put the door back on the hinge pin and replace upper hinge screws and cover.
Now reload all of the stuff.
broken cam with new piece. Put the door back on the hinge pin and replace upper hinge screws and cover.
Now reload all of the stuff.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JACK from MT. CARMEL, IL
- Parts Used:
- WPD7749401, 10114401
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Ice would not eject
Just removed old parts and replaced with new parts
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Don from Granbury, TX
- Parts Used:
- R0181181
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Main door was making a thunping noise when opened.
Took the door off, and replaced the plastic shim on the bottom that was the cause of the problem. The shim had broken into pieces and was no longer holding the door in height and alignment. I was proud of myself that I could repair it myself and avoid a $125.00 service call from a repairman. Total cost of repair including shipping and handling was just south of $12.00.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Duvall, WA
- Parts Used:
- 12580401
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
drain hose burned and plugged
replaced drain hose; melted ice that had built up behind it
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Jackson, MI
- Parts Used:
- WP67005959
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Socket set
The ice storage bin broke and the ice driver sleeve broke. Needed replacement to make the ice dispenser work.
removed ice bin from the fridge. snaped off the front plate. Removed 4 screws. this led to freeing up the auger. removed it and put the auger into the new bin and replace the front parts. Put storage bin back into fridge. Done. Might want to keep some ice cubes in a separte container until done. Not hard.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BettyeBettye from Florissant, CO
- Parts Used:
- 67002957
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
Need a Crisper drawer, order the frame, sent it back and order the drawer. It on it way.
Just put the dairy tray were I wanted it. Will do the same with the crisper drawer when it arrives.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Leonid from Beaverton, OR
- Parts Used:
- WP67002723
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The original frame had cracks
Replaced the frame
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol S. from Quincy, IL
- Parts Used:
- WP67005959, WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the auger was bent away from the cap and ice bucket was cracked
i had a serviceman look at it and he said it needed 6 parts, so i went to parts select and found the parts that i needed and i only needed 2 parts, the icemaker auger assembly and the ice bucket. It is working just like new again!!! thank you parts select, order on one day and recieved it the next day now thats what i call very fast service and shipping. If i should ever need parts for anything else parts select is the place i will go to. thank you again
carol
quincy il
carol
quincy il
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from Strongsville, OH
- Parts Used:
- WP67007098, WP12665101
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
ice build up in the dispenser chute
removed the spill tray, then two bolts. removed ice dispenser assembly by removing 3 more bolts. changed the seal and the insulation and reimstalled unit in hte reverse order. works perfectly -no more ice build up in the chute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jennie from Clarksville, TN
- Parts Used:
- WP67005959
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ice bucket was cracked due to cube getting stuck between auger and bucket
Repair was simple. Only problem was the screw holes weren't completely drilled through. This caused a little damage to the new ice bucket while driving the screws. Damage is minimal and ice bucket works.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maria from Indio, CA
- Parts Used:
- R0131454
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Refrigerator side will get warm
Went online to find a diagram for my particular model, found it, removed frezzer panel to gain access to the evaporator assy, performed a continuity test to the deffrost end cycle thermostat, found it open, ( out of range) on my dvom, at 25 deg., I should have had continuity, performed continuity test to heater assy. had continuity present, installed a new end deffrost cycle thermostat assy, tested, works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Costa Mesa, CA
- Parts Used:
- 12626911ED
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Left Upper door hing broken
Remove plastic hinge cover (phillips screwdriver). With door closed, remove ground wire (phillips screwdriver). Remove broken hinge (nut driver). Route wires through split in hinge body. Route wire through new hinge body. Install new hinge (nut driver). Install ground wire. Install plastic cover. Entire job took less than five minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Middletown, DE
- Parts Used:
- 12604201
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Part Broke Alpart
Put the new one in its place easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gail from Wesley Chapel, FL
- Parts Used:
- 67003895
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
part was missing when we bought the home
Just placed the item in the proper holding slots. I was very pleased with the service from the company and the item came quickly, so that I could start using extra freezer space.
Was this instruction helpful to you?
Thank you for voting!