YWGE745C0FS5 Whirlpool Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Rhonda from Hyannis, MA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
plug in burner wouldn't heat correctly.
Very simple..it took 2 seconds, just unplugged the old one & plugged in the new one. I should of done this a long time ago. It was perfect timing for Thanksgiving dinner! Thank-you so much.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Knoxville, TN
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Got new black granite countertops and the cooktop looked old and dated with the element cartridge on one side and the griddle on the other side
Removed the griddle and cleaned underneath. Replaced it with the new cartridge. Removed the otherside (old coil cartridge), cleaned underneath and replaced it with the new cartridge. My stove now blends beautifully with my new countertops without having to replace my whole slide in downdraft Jenn-Aire range! Saved my about $2000!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Erik from Evans, GA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One of the two elements did not work
I pulled out the old one and slid in the new one... if you can plug in a lamp, you can do this. They couldn't have made it any easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ilse from Napa, CA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cartridge plug non functional
The old cartridge was pulled out (unplugged) from the stove top and the new one was plugged in. What could be simpler, and I did it myself. I am glad I knew what was the problem, so it was easy. The promptness of your company was astounding, the day after my order online and a phone call. Fabulous business!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Salem, WI
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Coils would not heat up unless both control swithes were on high
I always wanted an extra cartridge for my stove. The grill it came with never got used. Now I have a 4 burner stove. However I need to look at the control switches. The brand new cartridge works the same as the old one did. I figured this would be the case.
Parts Select did a great job getting me the insert. Now I need to order up the switches. Hopefully them we will be back in business. More trouble shooting on the way...
Parts Select did a great job getting me the insert. Now I need to order up the switches. Hopefully them we will be back in business. More trouble shooting on the way...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Leesburg, VA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The other cartridge was 24 years old
I cook on the stove top daily and have been the homeowner for 7 years. The cartridges obviously were showing signs of wear and tear, so I ordered the cartridges from Parts Select.
I was so impressed with the packaging and the shippment package. There was no way the cartridges would not be working....and I was right!
It was so easy to install and so improved the appearance. I do believe the coils are heating better than the old ones.
What a way to dress up and old stove. I remember my father always saying, "if it isn't broken, don't fix it". I just improved what I have, can still use all the accessories, and am very pleased with Parts Select.
Thank you for making this so easy,
Sandra (Leesburg, VA)
I was so impressed with the packaging and the shippment package. There was no way the cartridges would not be working....and I was right!
It was so easy to install and so improved the appearance. I do believe the coils are heating better than the old ones.
What a way to dress up and old stove. I remember my father always saying, "if it isn't broken, don't fix it". I just improved what I have, can still use all the accessories, and am very pleased with Parts Select.
Thank you for making this so easy,
Sandra (Leesburg, VA)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Pensacola, FL
- Parts Used:
- JEA8120ADW
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old burners were chipped and stained
Removed old units, cleaned the areas underneath well and plugged in the new units. Stove top looks like new again,
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pam from Oregon City, OR
- Parts Used:
- JEA8200ADX, JEA7000ADSA, A341
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lge. coil element was broken
This was VERY easy. We simply unplugged the old stainless steel dual coil cartridge out of the Jenn-Air and plugged the new one in to it's place.
We also replaced the old non stick griddle and bought a black cartridge cover. And "wha-lah" we had a new looking cooktop. Great cust. service.
Making sure that the recepticles were matched up at the time of ordering was very important as there are two types.
We also replaced the old non stick griddle and bought a black cartridge cover. And "wha-lah" we had a new looking cooktop. Great cust. service.
Making sure that the recepticles were matched up at the time of ordering was very important as there are two types.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah J from Chester, VA
- Parts Used:
- A341
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I wanted to cover my grill on my stove.
I just put the cover over the grill on my Jenn-Air stove.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- PATRICIA from REEDSVILLE, WI
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My burners were not working properly
It is just a matter of taking out the old cartridge and replacing it with the new on and it looks like a almost new stove. Works amazing.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeremy from Julesburg, CO
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
the old stove top insert quit working
it wen't fairly well, the old one popped right out and the new one slid right in no problem, till i turned it on and the wiring is wrong, the front burner turns on as it should, but when you turn on the rear, both burners come on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rose from ORFORDVILLE, WI
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace Burner
Took out the old, replaced with the new! Simple. Easy. Right part the first try!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward C from Parishville, NY
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My Jenn-Air had an old, very used element
with Jenn-Air, you just plug it in - just like that you have an almost new kitchen range.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lance from Northfield, IL
- Parts Used:
- WP7430P044-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Erratic oven temperature, would not hold a setting or would get to that setting and then loose it shortly afterward.
Removed two screws on sensor in the oven. Pulled out stove and after unplugging same removed the back panel. Sensor has an electric connection on the rear of the oven with a connection that is easily separated. Threaded new sensor electrical connection through inside of oven and connected on the back of stove. Pushed insulation back around the wire were in goes through to the oven. Replaced back on stove and screwed in two screws which hold sensor inside the oven. Replaced back cover on stove, plugged it in and pushed it back in place. Did the trick for me..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James Byrd from Delray Beach, FL
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old Electric Eye became rusty and discentegrated ....
Unplugged old one ..... plugged in New one ! That' why I own 3 Jenn Air Ranges The oldest are both 27 years old and work and look NEW !
Was this instruction helpful to you?
Thank you for voting!