CRE7500ADL Maytag Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Sun City West, AZ
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Element burned out
Removed old element (two screws) unclipped two wires. Clipped the two wires to the new element (one at each end), reinserted new element, replaced the two screws. Done. Oh, flipped the circuit breaker back on:-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Elkin, NC
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
bottom baking element blew out
unscrewed the old baking element, took the yellow wire off, and put the yellow wire onto the new baking element and screwed it back onto the oven. Took less than 15 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty Mae from Canton, OK
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
oven would not heat
1. Turned off electricity to oven.
2. Unscrewed old oven element. Found it had burned through
on the underside.
3. Inserted & screwed in new oven element.
35 year old oven good to go.
2. Unscrewed old oven element. Found it had burned through
on the underside.
3. Inserted & screwed in new oven element.
35 year old oven good to go.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Valhalla, NY
- Parts Used:
- WP74003019
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The oven did not heat up. I noticed the element was cracked.
I watched the video provided by Part Select before I ordered the part. I removed the old element by taking out two screws and unplugging it from the wires. I put the new element in place, connected the wire to the right side and then opened up the back of the range to connect the left side. The repair was easy, but the video did not show that you had to connect the left side from the rear of the appliance. It was easy to figure out. The appliance works like a charm...no like an oven.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Quincy, FL
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Our oven quit heating over Thanksgiving. Only the broil element still worked.
I figured there couldn't be much else but the element that was bad, so I searched for "Magic Chef stove parts" on Google and found your site. Your site described the location for the model number of my stove, and also gave troubleshooting tips. I verified the element was bad with an ohmmeter and ordered the part from you guys. It arrived early, and installed with 2 screws and 2 push-on terminals. Stove works great now! I'm a web programmer and I think your website is very intuitive and useful. The information like model numbers, troubleshooting, parts measurements and extensive parts pictures is perfect for your customers. I found the correct diagnosis and part quickly, and ordered without a problem. Thanks - and keep up the good work! Mike
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rosemarie from Missoula, MT
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The lower oven element burnt out.
After removing the old broken element, I searched the internet for the part by brand and model number. With very little trouble, I located the correct part, ordered it and waited for the notice of shipment. In 5 days, and that included Memorial weekend we had the part and in 5 minutes the part was installed. The cost was $31.20 plus shipping..not bad!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Waynesboro, VA
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Baking element had burned out.
Followed the instructions exactly as described on the Parts web site video, shut off power, removed old baking element, checked connectors, replaced with new element, turned power back on to the range. Repair took less than 15 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- melissa from moultrie, GA
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
the bottom element was bad.
I removed the element from the back of the oven.Then i removed the wires from the bad element. I then attached the wires to the new element,and screwed it into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brenda from Harlan, IA
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
baking element burned out
Watched the video provided and followed the instructions. I couldn't believe how simple it was to fix the problem! I ordered the part Sunday evening and it was sitting in front of my door Tuesday afternoon. Talk about service! I couldn't be more pleased with the convience of fixing my problem right from my own home. Thank You!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Oakland, CA
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The oven would not heat for baking
Disconnect the electrical cord, remove the oven racks, remove the screws holding the bake element with a screw driver, pull out the bake element, then replace it with the new element. Done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- calvin from summit, NJ
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
no heat
unscrewed covers . unpluged heating element , pluged in new one , put covers back on. oh yeah unplug stove first.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SARAH from DUNNSVILLE, VA
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
element had burned out
unscrewed the element and pulled it out, then put the new element in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arlyn from Bennet, NE
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Burned out element
simple as1-2-3
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Emogene from Indianapolis, IN
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Heating Element Broke
Remove the bottom rack from the oven. Pull the heating element straight back and out of the oven. Inserted the replacement burner in the opposite manner. Part was delivered in a timely manner.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amanda from Columbia, MO
- Parts Used:
- WP74003019
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
heating element burned out
We repalced the heating element n no time. Easy to do and the price couldn't be beat!
Was this instruction helpful to you?
Thank you for voting!