Models > KGRS505XBL01 > Instructions

KGRS505XBL01 KitchenAid Range - Instructions

Jump to:

All Instructions for the KGRS505XBL01
46 - 47 of 47
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jayne from Willimantic, CT
Parts Used:
W11665456
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Leveling legs were broken during the summer
The range in my classroom had the leveling legs broke off by the summer staff. I ordered two new leveling legs and the night custodian replaced them in about 45 minutes and them leveled the stove. Parts were just as stated and easy to order.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from Strasburg, CO
Parts Used:
W11596211
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Lower oven would not ignite
Removed grills, lower burner cover and burner inlet cover. I then pulled burner out far enough until plug for igniter was exposed. Unclipped wire connection by squeezing in retainer clip and then pulled apart. Pulled burner tube/igniter assembly out and removed two igniter retaining screws. Then reinstalled in reverse order.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KGRS505XBL01
46 - 47 of 47