66598013801 Kenmore Range - Instructions

It was real easy. Unscrewed two screws ( after shutting off electric circuit ) and disconnecting the electrical spade connections. Slid in the new element and reconnected the electric .

removed rear screws, then the top bracket. (I should have turn off the circut breaker...got a little spark) Turn off the breaker, used the pliers to remove connectors and to pull an extra length of wire out to make sure it would not get lost inside the oven frame.
Wires back on, screws in and fired it up! All Good!

Repair co. wanted $127.00 to come to our home to est. repair , plus time, labor, and parts. I used screw driver to take (2) screws out and pulled element out , inserted new element , and tested oven with temp. gauge. End of story !! saved at least $150.00 thank you!!! for having the parts. so easy a man that lives in a cave could do it.

Removed four screws and the brace holding the existing element. Replaced with new broil element and secured with the four screws and brace.

two screws out and un pluged heat unit

By the time my husband got home I can disconnected the broken element. We received the new element by mail very quickly. My husband had it installed in 5 minutes.

My husband did the repair work in less than 15 minutes. He was happy and I was happier.

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. It was a piece of cake.
The repairs were complete in less than 4 days. A repair company could not make an appointment in less than a two week wait. Plus, we saved the repair bill.

I removed the two screws that hold the element in place on the back wall of the oven. I also had to remove the the bracket holding the element to the top inside of the oven. I then pulled the element out about 3 inches and disconnected the two wires. I then installed the new element and reversed the steps. It now works like new.

Easy repair. Disconnected power to oven. Removed two screws holding rear connectors and two screws holding element support. Replaced with new element. Turn power on and it worked.

remove bad element got on line ordered new one arrive in two days standard shipping

The repair went well. It was very easy. My husband removed the old element, rmoved the screws at the back of the oven, also the electrical connections. then put the new element in place connected the electrical clips, put the screws in place and the installation was complete. A screwdrive was all that was needed.
There were no instructions included with the part.

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you

First I read many of the stories on your sight. Then I decided "I am woman hear me roar!" I can DO this...Couldn't find the stubby screw driver, so I used a longer one.I also laid out the pliers, just in case. I unscrewed the four screws and pulled out the expired element. Had to finish breaking it to remove the bracket that held it in place. At first I thought I would have to call for help to pull the terminal wires off. I was afraid of damaging them, but a firm grip with just my fingers was all it took, no pliers needed. I used my I-phone flashlight to see to put the screws back in place. I made toast! It was yummy.

My husband installed the lower bake element. Pulled out the range. Unscrewed the element and screwed in the new one. Pretty simple. Don't loose the wires once you unscrew it. Cost us less than $40 to repair it ourselves and saved $$ by not calling a repair company.