Models > 79075353313 > Instructions

79075353313 Kenmore Range - Instructions

Jump to:

All Instructions for the 79075353313
61 - 75 of 80
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michael from Wimauma, FL
Parts Used:
316400601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Purchased home where previous owner melted Aluminum Foil to bottom panel of oven.
Removed 2 screws from rear of panel and dropped new panel in. Re-installed screws. Oven like new again. Aluminum foil was burning and emitting foul odor when oven was on.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Douglas from Minooka, IL
Parts Used:
5304475129
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
foot on burner grate broke
Just pushed the new rubber foot into the hole. Took about 10 seconds to fix.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John M. from PLEASANT PRAIRIE, WI
Parts Used:
316490000
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
no heat
Replaced the oven probe because a no heat problem. also had to replace the oven control. That was a bit expensive but still saved me hundreds not calling a serviceman. By the way, it works like new.....
Was this instruction helpful to you?
Thank you for voting!
Customer:
christopher from big pine key, FL
Parts Used:
316203200
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
broil element burn out
take back planel off, take wires off old element and intsall new element hookup wires, put back planel ..under one hour job
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 79075353313
61 - 75 of 80