20213 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- kevin from wheaton, IL
- Parts Used:
- 12200039
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Fan switch on top was broken off inside outer housing rendering all controls useless, worst of the fan.
Cut power!
Removed old switch.Only problem was new switch had shifted the four 'spade' connectiors on back so when I was done fan and light switch was crossed.
Everything PartSelect had on their site was perfectly correct.
REALLY appreciated the way PartsSelect handled everything, I will be back for further help on other things.
Removed old switch.Only problem was new switch had shifted the four 'spade' connectiors on back so when I was done fan and light switch was crossed.
Everything PartSelect had on their site was perfectly correct.
REALLY appreciated the way PartsSelect handled everything, I will be back for further help on other things.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gerard P from Poughkeepsie, NY
- Parts Used:
- 12200039
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers
Housing of fan switch broke causing the switch to be inaccessable to use
After accessing the switch and removing the wires(four wires as the rocker switch operates both fan and oven light) I attached the wires to the new switch. However , I was unable to mount the switch in place as I could not get the spring - clip type of fasteners to slip on.
Fortunately, there was space to drill a hole on each side of the switch and I used brass machine screws
and nuts to hold the switch. The round-head screw
tops show on top of the stove, but at least the new switch is in place and operating.
Fortunately, there was space to drill a hole on each side of the switch and I used brass machine screws
and nuts to hold the switch. The round-head screw
tops show on top of the stove, but at least the new switch is in place and operating.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- stephen from montgomery, NY
- Parts Used:
- W11117769
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
No leveling legs
Ordered the leveling bolts, very fast shipping, parts correct as shown. Purchased a condo by the shore, frige had no levelers, they went in smoothly & was done in no time.
Steve
Steve
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William D from Edinburg, TX
- Parts Used:
- 12200039
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Fan/Light switch worked for fan but not for light
The job was easier than I thought it would be. Turned off power at breaker first! Used phillips screwdriver to remove 2 fairly tight screws located on the vent side of the switch mounting plate. Flipped over plate and wrote down the 4 spade tip wire colors and location on switch. Removed the wires from the switch and removed the switch by prying off the locking washer with a sharpened/filed thin putty knife to get under it and then a flat blade screwdriver to finish removing it. Put the new switch in, hooked up the spade tip wires, mounted the plate back on and turned on the power. Worked great and I even impressed my Wife!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from Birmingham, AL
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original grill didn't work well, and I needed 4 eyes to cook on. I received the new module quickly, and had it installled in 20 seconds. Immediate heat and good looks. It really transfors this old range!! Thanks!!
Lifted out and unplugged grill. Plugged in and put in place new module. I tested it right then and it worked great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dwayne from Minden, LA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
eyes burned out on old cartridge
Simply unpluged the old cartridges and plugged in the new ones, it could not have been easier. My 18 year old cooktop looks brand new. My old cartridges were black and the new ones are stainless, but, the look is good, since most new appliances are now stainless. The best part is that it cost less than half of what a new cooktop would have cost plus all of the mess that would have been made tearing out the old one and installing a new one. Thanks PartSelect, A Very Satisfied Customer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ROBERT L from SUSSEX, NJ
- Parts Used:
- WPY04100019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
element arc'd
needed hammer to help loose screws .pulled out and replaced leement
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marty from Florence, KY
- Parts Used:
- A302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
installed griddle and new burners
unplugged old one and installed new griddle and burners. very easy and less than 30 seconds to complete.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gwendolyn from Halifax, PA
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My Jenn-Air stove top cartridge paint was peeling.
I removed the stove top cartridge from the stove top and plugged in the new one. No tools were needed. It was very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christopher from Royal Oak, MI
- Parts Used:
- WP7403P899-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
Oven stopped heating
I had a service guy come in and he told me the repair would be $550.00. I asked for a part list and did it myself. You guys saved me hundreds of dollars.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sonny from MOUNT VERNON, GA
- Parts Used:
- Y708572
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
A local repair shop informed the individual that the burner unit could not be repaired and she would have to replace the cooktop..
After examining the burner unit I noticed that one of the male contact spades was burned and look deformed. After removing the spade I discovered that it had been originally manufactured incorrectly. I went on line to try and find the part. I found it at this site . I ordered 2 of the spades and replaced the deformed spade and another one that looked like it had gotten a little hot. She tried the unit and it worked perfectly. She had not used that burner unit for a very lengthy time. The investigation of the problem took a little time, but the repair went very fast. Moral is :" If a spade doesn't look right, it probably isn't", but either the individual spade or plug can be replaced. This site is now my "GO TO" place for parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- PHYLLIS from CAMANO ISLAND, WA
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Cracked glass top
Replaced unit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Russell from CHAMPAIGN, IL
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Bad burner on surface module.
Remove old module and insert new one. Took longer to get out of box than to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from BEACHWOOD, OH
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heating elements in one cartridge did not heat; in the other cartridge, inifinite switch needed
Removed and replaced infinite switch ; removed and replaced both cartridge so that they matched
manual instructions were included in the email notification re' shipping confirmation
manual instructions were included in the email notification re' shipping confirmation
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- connie from demarest, NJ
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cooktop did not heat up
Just unplug the old broken cartridge and plug in the new one. It was very easy. Took 5 minutes.
Was this instruction helpful to you?
Thank you for voting!