22308 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jean from Gloucester, MA
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cartridge did not heat
Unplugged the old element and plugged in the new one.
The best part was it arrived less then 24 hours after I ordered it. Unbelievable, thank you.
The best part was it arrived less then 24 hours after I ordered it. Unbelievable, thank you.
Was this instruction helpful to you?
Thank you for voting!
Disintegrated grease filter and disfigured grill cover.
I was delighted to find that the parts to a Jenn-Air range which was new in 1985 were available from PartSelect.
Website very user-friendly; shipping immediate; parts were just right; they fit and they enhance the range tremendously.
I was 100% pleased!
Website very user-friendly; shipping immediate; parts were just right; they fit and they enhance the range tremendously.
I was 100% pleased!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from FRESNO, CA
- Parts Used:
- WP71003558, 715396K
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Socket set, Wrench set
Downdraft blower motor noise, fluctuating fan speed and binding. Also replaced indicator light for burner knob.
1. Turned off electrical breaker at electrical service panel.
2. Tested stove top to verify correct breaker was off as well as cook top.
3. Removed front electrical connection panel @ cook top.
4. Disconnected wires to blower fan. (Before disconnection I color coded wires for correct reconnection)
5. Removed the bracket holding the armored cable (protecting motor wires) and removed wires (where connects to electrical connection box).
6. Removed 4 nuts @ blower motor housing and removed blower motor housing and fan.
7. Removed 3 screws that attached the blower fan to the blower motor housing noting or marking the position of the housing to the motor bracket in order to have the same placement position.
8. Pulled the 3 connecting wires from the armored cable protector to separate housing from motor.
9. Removed the fan assembly from the blower motor shaft by using an allen wrench carefully noting the distance from motor face to the fan.
10. Noting/marking the position of the motor mounting bracket connections unscrew the nut and screw that secures the bracket to the motor.
11. Reassemble in reverse order.
Note:
I taped the motor wires tightly together every 3 or so inches to be able to slide through the armored cable.
I also had to rotate the mounting bracket a little to be able to perfectly match the motor housing to the motor bracket.
The new fan motor works great but it's a little bit louder.
2. Tested stove top to verify correct breaker was off as well as cook top.
3. Removed front electrical connection panel @ cook top.
4. Disconnected wires to blower fan. (Before disconnection I color coded wires for correct reconnection)
5. Removed the bracket holding the armored cable (protecting motor wires) and removed wires (where connects to electrical connection box).
6. Removed 4 nuts @ blower motor housing and removed blower motor housing and fan.
7. Removed 3 screws that attached the blower fan to the blower motor housing noting or marking the position of the housing to the motor bracket in order to have the same placement position.
8. Pulled the 3 connecting wires from the armored cable protector to separate housing from motor.
9. Removed the fan assembly from the blower motor shaft by using an allen wrench carefully noting the distance from motor face to the fan.
10. Noting/marking the position of the motor mounting bracket connections unscrew the nut and screw that secures the bracket to the motor.
11. Reassemble in reverse order.
Note:
I taped the motor wires tightly together every 3 or so inches to be able to slide through the armored cable.
I also had to rotate the mounting bracket a little to be able to perfectly match the motor housing to the motor bracket.
The new fan motor works great but it's a little bit louder.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ray from NESCONSET, NY
- Parts Used:
- W11120795
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
Half of elements didn’t heat
Your staff helped me find the updated replacement that worked and when I was having some connection issues helped me get it right!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from Syosset, NY
- Parts Used:
- W11120795
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Burners were not regulating and they were just going on high
I am not really handy. When the repair man came and gave me a price of $220 to repair two infinite switches, I looked up the cost of the switch and saw that it was easy to do...and it was! I saved $140 for doing it myself (no help from my husband).
First I turned off the power, unscrewed two screws and took the knob panel off. Wrote down the colored wires and then pulled them off the infinite switch (some needed pliers) and then i just put the wires back on the new switch...done...it works!
First I turned off the power, unscrewed two screws and took the knob panel off. Wrote down the colored wires and then pulled them off the infinite switch (some needed pliers) and then i just put the wires back on the new switch...done...it works!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- PHYLLIS from CAMANO ISLAND, WA
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Cracked glass top
Replaced unit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Russell from CHAMPAIGN, IL
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Bad burner on surface module.
Remove old module and insert new one. Took longer to get out of box than to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from BEACHWOOD, OH
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heating elements in one cartridge did not heat; in the other cartridge, inifinite switch needed
Removed and replaced infinite switch ; removed and replaced both cartridge so that they matched
manual instructions were included in the email notification re' shipping confirmation
manual instructions were included in the email notification re' shipping confirmation
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Las Vegas, NV
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I wanted to replace the grill set and the older style solid cartridge element in my cook top.
I simply removed the old cartridge by lifting it up and pulling the plug end out. I slid the new coil cartridge with the plug end in its place. The grill replacement was similar. Remove the grll grates, pull out the burner element from its plug position, remove the grill rocks and insert the new coil cartridge in its place. No tools or special skills required. It's like I now have a new cook top.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Lebanon, TN
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heating element was bad and couldn't locate anywhere else for this price. Outstanding service and phone assistance. Will use again for sure!
Simple repair. Unplugged element cart. and replaced.
Was this instruction helpful to you?
Thank you for voting!
Old coil went out
I pulled out the old cartridge cleaned the stoptop up. Plugged in the the new cartridge ..there was a little steam left over fromt he cleaning when I turned up the heat but it went away. Looks great and save me $3k the difference in the price of a new stove top.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Malcolm from Lynchburg, VA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Stove did not include any burners only grill
When burner insert arrived just plugged in. Piece of cake !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Hillsborough, NJ
- Parts Used:
- 12001127
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
switch shorted and burned
Removed grill cover, two phillip screws on front end of the vent holding the switch assembly in place. Lifted the switch assembly and removed the two wires (plugged into lugs). Then removed the two universal nuts with a 3/8" nutdriver and removed the old switch. Cleaned area and put the new switch in place and replaced the universal nuts, then attached the wires. Replaced the switch assembly and the two holding screws. Then inserted the grill cover and Voila! Finished
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JESSE from VINEYARD HAVEN, MA
- Parts Used:
- 12001127
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Switch Stop Working
First I removed the two screws that hold the chrome piece that had the switch in it. I had to disconnect the two lights that light up when the elements go on, had to do that to get to the lock washers that hold the switch in place. Put the new switch in place but couldnt get the new lock washers on the both broke, had to go to the hardware store and get new ones just as little bit bigger, they went on slick. The switch works great again, buy new lock washers before you start
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Hackensack, MN
- Parts Used:
- YA145A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
needed a new burner for the range
Took out the old burner & replaced it with the new burner. Wanted a raised burner for large pan & kettles.
Was this instruction helpful to you?
Thank you for voting!