Models > RB75GN2G > Instructions

RB75GN2G Hotpoint Range - Instructions

Jump to:

All Instructions for the RB75GN2G

Customer:: Craig from Kernersville, NC
Parts Used:: WB14X104
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven door hinge roller deteriorated, oven door hard to open.

Open and slide door upward off of hinges. Removed bottom drawer to access hinge spring. Detached spring, noting proper hole in hinge for reinstallation. Removed three screws holding hinge and removed hinge. Compared new part to old...exact match. Inserted hinge, and reinstalled the three screws. Reattached spring in hinge hole. Slid door back down onto hinges. Done in four minutes flat!

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Richard from Winchester, MA
Parts Used:: WB14X104, WB14X103
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

oven door jammed,could not open it

Removed old hinges and installed new hinges.
Hardest part was determining that worn hinges were the cause of problem, then ordering replacements. GE website hinge on exploded view did not look like hinges I removed.Thanks to Google I got on to PartSelect.com website where excellent pictures of hinges and one-inch grid confirmed they sold exactly what I wanted for my 13-year old range, the model number of which was not even on the GE website.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ann from WILMINGTON, MA
Parts Used:: WB31K10265, WB31K10266, WB30M2
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins

Needed new replacement surface element and drip pans

Surface element easily unplugged and removed, drip pans lifted out, New drip pans inserted, New 8" surface element and present 6" surface elements Inserted and plugged in.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: ANNE from FT. LAUDERDALE, FL
Parts Used:: WB44X232, WB2X9719
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set

Broiler element would not work.

Removed the old element: removed clips holding the element, unscrewed the 2 screws that hold element in place. On the back of the range, removed casing to get to the connection wires, disconnected the element then removed the element. Reversed procedure to replace. Thanks for the speedy ordering and delivery.

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: John from Buffalo, NY
Parts Used:: WB31K10266
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

replace a drip pan

OK, I put the drip pan under the burner. Without a single problem.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: octavio from lake worth, FL
Parts Used:: WB44X232
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins

broil unit caught fire and burned all the way around it

My great and talented hubby did it. He can fix anything. It was easy for him.

I love this website to purchase parts. Both times I have ordered something from you, it has been at a reasonable price and I received it really quickly.
Thanks!

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paul from Southern Pines, NC
Parts Used:: WB30M2
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Surface element was corroded.

Removed existing surface element and replaced with new element.

P.S.

Part Select service was excellent.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Russell from Brea, CA
Parts Used:: WB14X104, WB14X103
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The oven door would not open or close all the way. The plastic hinge roller guides broke on both sides.

Remove oven door from hinges, by pulling it straight up and off, (like you would do for closer access to clean inside). Remove the storage drawer. Lift up and away off the track, (like a file cabinet drawer). With the drawer out and away, you can see how the springs are easily detached from each hinge. Note the location of where the springs attach to the hinges, and bottom of stove. Remove each spring. Three screws on each side hold the hinges on. Unscrew, and set them aside. (The new hinges did not have new screws in package.) Place new hinge in place. Reinstall in reverse of disassembly. If any part of the door or face of the stove (where hinges mount) was bent slightly due to forcing door open, reform with light hammer taps and C-clamps. Enjoy for ANOTHER 10+ years, because it's a GE Profile Stove : )

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Christy from Danville, CA
Parts Used:: WB3X5699
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

timer knobs broken off

I simply took the 3 new timer knobs and slid them on the metal shafts. It took less than 5 minutes to replace all 3 knobs. Now I can set the start, stop and time functions which have been inoperable for over 5 years. An easy and straight forward .

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Emma from The VIllags, FL
Parts Used:: WB30M1
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

old unit failing to heat all coils

I first removed the unit by pulling gently from connection. Replaced the new one in that same manner - simply inserting into connection.

Very easy, I'll probably try it again soon.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Angelo from STATEN ISLAND, NY
Parts Used:: WB14X103
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

left hinge wheel cracked

REMOVED DOOR TO OVEN
REMOVED HINGE [3 SCREWS]
REMOVED BOTTOM DRAW
UNHOOKED SPRING FROM LEFT SIDE ATTACHED TO HINGE
PULL OUT DEFECTIVE HINGE
REPLACE WITH NEW HINGE AND SCREWS
REHOOK SPRING TO HINGE & REPLACE DOOR
COMPLETE

FOLLOW VIDEO PROVIDED BY PARTS SELECT

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: GARY from BETHANY, MO
Parts Used:: WB14X104, WB14X103
Difficulty Level:: Very Difficult
Total Repair Time:: Less than 15 mins

Oven door would not stay open.

Called in and talked to someone and he look yup what he thought was correct but after i got them theywere wrong so i sent them back for a full refund minus 9.90 freight. I still need to figure out what i need for my 27 inch wall oven. Please help. Thanks

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Phil from BELLEVUE, WA
Parts Used:: WB14X104, WB14X103
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

The right side hinge roller broke making the door balky

Lifted the door off the hinges, unhooked the spring from each hinge, unscrewed 3 Phillips head screws from the face plate of each hinge and removed the hinge assemblies . Hinges went in the way they came out; easy shmeasy. Took less than 15 minutes and the door is like new.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Linda from Hindman, KY
Parts Used:: WB21X36771
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Burner wouldn't operate

Took Switch panel off range. Disconnected Infinite switch. Reinstalled infinite switch.. Replaced panel. Repair was very simple and self explainatory.
Knott County Housing Authority Maintenance Personnel

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Young from Oakland, NJ
Parts Used:: WB44X232
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set

broken heat element

It was very easy than i expect,
Just pullout the stove from the location to access rear side of stove,
unscrew 3 nuts with socket rench and disconnected wire. Opened front door of stove, unscrew 5 screwss , then pulled out broken element, replaced it with new one.
It is very very easy , Dont be affraid do it yourself.....

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the RB75GN2G