JHP98G*Y2 General Electric Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Merle from Hainesport, NJ
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Over took forever to come to temperature
My daughter and I turned off the breaker to the range and removed the old element and replaced it with the new one. My husband came home and took over after we had done almost everything ourselves!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Eastchester, NY
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Element Sparked then split on the left side
Unpluged Stove, Unscrewed the wires attached to the Element in the back of stove after I removed the cover. Removed the two screws that held the Element at the back of the oven compartment. Then replaced the Element with the new one and put back the screws, the wires and the cover in the same sequence iI took it apart. Plugged it back in works like new!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cindy J from Reedsburg, WI
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
element burnt out
CAUTION: Make sure stove is unplugged as there is still current with it off! Removed 2 screws to pull old element out & 2 screws on electrical wires. Put new element in & screwed all screws, very easy repair. A big THANK-YOU to PartSelect for getting the part to us so fast!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Xenia, OH
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Baking element burned out.
My husband removed the screws holding the element, disconnected the wires from the old element. He then reattached the wires to the new element, putting it back into place, tightened the screws, and we were cooking again. The shipping service was GREAT! I ordered the part on-line and it arrived next day! Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Havertown, PA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
original oven element broken, lack of heat
I removed the original element with socket set (two hex nuts). I removed the element and face plate, reversing the steps when installing the new element. It was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from Boca Raton, FL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Baking element burned out.
I am a CPA and not real handy at all. But I was able to remove the old element and install the new element in less then 15 minutes. It burned out on Saturday, I ordered new one FED-ex to speed up- received new one, on Tuesday. Very quick, and this was last week, the week prior to Thanksgiving- so my wife really needed our oven. Perfect fit. And I am not related to this company in any way, nor was I paid anything to say this, just happy this worked- or we'd be spending a lot more money.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fernando from Auburn, GA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Burned out oven element
Remove two screws that secure the plate to the oven wall. Pull element out about 6 inches, then remove two screws that attach the element to power lines. Reverse for installation. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- pierre from virginia Beach, VA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Electric Burner In oven failed
Parts arrived quickly and install was easy as removing two screws and removing the broken burner. Installed the new and I was done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Courtney from Coon Rapids, IA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Blown Baking Element
The old part was easily removed with a nut driver, and the new element went right in with a nut driver and screwdriver.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- marlene from san rasael, CA
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Element was not working
Removed old element by unbolting two nuts, replaced with new element and two new nuts that were included. Very easy and worked fine.Wish all repair jobs were this easy!Great service with ordering and prompt delivery, too.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patrick from Riverton, WY
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Oven woudn't heat - lower element didn't heat
Took out the two screws that held the old element. Disconnected (unscrewed) the two power cords. Screwed in new power cords and put two screws in new element. Works like a charm. Took longer to get the new element out of the box than to replace it! Thank you!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Tavares, FL
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Lower element burned out
Wasn't sure what to do had a friend come over and it was fixed in less than 15 min. The shipment was really fast and although I only had a partial model number because of age of the unit your search engine found it. Thanks all, my wife is very happy. Your the best!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- harold from burlington, WV
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
baking element broke and would not heat
Shut electric off to range[circuit breaker], removed door and baking racks, removed two screws holding element to back of the oven compartment, pulled the element out to expose the wires, removed screws fastening the wires to the element. Discarded the damaged element and installed the new one in the reverse order. Turned on power and tested. Everything worked fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marcus from Spring Lake, MI
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Bottom Bake Element burned out
Replaced old bake element with new one. 4 small screws/nuts. From order to fix was 3 days. My wife was impressed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nicholas from Davidsonville, MD
- Parts Used:
- WB44X5082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Baking element in oven broken
Went on line to find the part number and ordered the part. It came in the mail two days later and I installed in about five minutes.
Was this instruction helpful to you?
Thank you for voting!