CC3520SRW Crosley Range - Instructions

After noticing that our oven was not heating up, we talked to some other people and they said that we should try replacing the heating element. Replacing the heating element was as simple as removing two screws, pulling out the old element, reattaching the new element and putting back the two screws. One mistake I made was not unplugging the range before doing this repair and so I got a little electric shock before I was finished. After getting shocked I did unplug the range before continuing with the repair. The best part is that my oven now works again with no problem. This repair couldn't be any easier.

I am a 62 year old woman. All I had to do was unscrew the retaining screws on the back of the oven wall, pull the element out and unplug it. When the new one came, I did it in reverse. It took about five minutes. Ps: I did turn the breaker off first....

first I took the opportunity to clean the oven really well, Turned off the electricity at the breaker box, Took out the screw on each side and pulled out to view the clips they were attached to, they came off easily, I attached the new ones pushed in to place and reattached the 2 screws. Easiest thing I've ever done and was so cost effective to do this instead of replacing the stove. Works great!I can't believe it was shipped so quickly. I will be shopping here in the future!!!

My husband unscrewed the old element and pulled out the wires and took the old element off and reconnected the new element and screwed it back in in less than five mins. Your video explained how to do it. The service was great. The price was good and it got here fast. I ordered it on Sunday and it was here by Wed.morning.

I was able to get on the website, find the part, and order it. It was delivered the next day. I followed the video and it was as easy as the video demonstrated that it was. As a single mother of two, being able to handle this on my own without the expense of hiring a repair person was a huge thrill! Thank You!

I shut the breaker off at the main power box.
In the oven, I loosened two screws to remove the old element (parts now, after the burn-out). I pulled the old element out of the back wall of the oven to expose the wire connections. I detached the simple sliding wire connectors. Done with removal. I waited for the new element to arrive (one week). Installed easily. Turned on the breaker and baked a few potatoes. Very simple.

I watched the video provided by Part Select before I ordered the part. I removed the old element by taking out two screws and unplugging it from the wires. I put the new element in place, connected the wire to the right side and then opened up the back of the range to connect the left side. The repair was easy, but the video did not show that you had to connect the left side from the rear of the appliance. It was easy to figure out. The appliance works like a charm...no like an oven.

I figured there couldn't be much else but the element that was bad, so I searched for "Magic Chef stove parts" on Google and found your site. Your site described the location for the model number of my stove, and also gave troubleshooting tips. I verified the element was bad with an ohmmeter and ordered the part from you guys. It arrived early, and installed with 2 screws and 2 push-on terminals. Stove works great now! I'm a web programmer and I think your website is very intuitive and useful. The information like model numbers, troubleshooting, parts measurements and extensive parts pictures is perfect for your customers. I found the correct diagnosis and part quickly, and ordered without a problem. Thanks - and keep up the good work! Mike

It was very easy to fix

snaped them into oven cavity attached temp bulb job complete

unscrewed covers . unpluged heating element , pluged in new one , put covers back on. oh yeah unplug stove first.

unscrewed the element and pulled it out, then put the new element in.

simple as1-2-3

Remove the bottom rack from the oven. Pull the heating element straight back and out of the oven. Inserted the replacement burner in the opposite manner. Part was delivered in a timely manner.

I removed the element from the back of the oven.Then i removed the wires from the bad element. I then attached the wires to the new element,and screwed it into place.