Models > SMH7175CC > Instructions

SMH7175CC Maytag Microwave - Instructions

Jump to:

All Instructions for the SMH7175CC
16 - 23 of 23
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Glenn from Pedricktown, NJ
Parts Used:
DE47-20059B
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
no power
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Tipton, MI
Parts Used:
WPDE31-10172A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
motor was slipping
replaced the drive motor and coupler coupler from samsung parts
Was this instruction helpful to you?
Thank you for voting!
Customer:
outstanding from Galena, MD
Parts Used:
WPR9800486
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
microwave would not heat.
hardest part was taking the microwave down off of the wall to gain access to the diode. Thought if was the transformer but ended up being just a blown diode. remove and replace and bench test. that part took 15 minutes . moral of the story don't boil water under the side of the microwave that holds the electric components.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SMH7175CC
16 - 23 of 23