Models > SMH7174BC > Instructions

SMH7174BC Maytag Microwave - Instructions

Jump to:

All Instructions for the SMH7174BC
16 - 27 of 27
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from Bloomfield, CT
Parts Used:
DE67-00179A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Turntable not turning
Pulled off the old coupler (stem was broken), pushed on the new one... Voila!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Valerie from Rock Springs, WY
Parts Used:
DE74-00023A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Cooking tray shattered
My daughter was trying to run the microwave timer and ended up nuking the cooking tray, which shattered. First web place I found wanted 55$ for this tray and this site sold it for 19.99. It shipped super quickly. I am very pleased with this company!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glenn from Pedricktown, NJ
Parts Used:
DE47-20059B
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
no power
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Tipton, MI
Parts Used:
WPDE31-10172A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
motor was slipping
replaced the drive motor and coupler coupler from samsung parts
Was this instruction helpful to you?
Thank you for voting!
Customer:
Muhammad from Jersey City, NJ
Parts Used:
WPR9800486
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
No Heating.
Information provided on the web site by Part Select, were helpful and encouraging to select and buy the part needed to repair the appliance. No doubt, a skilled person having background in the repair of appliances should attend such repair job.
Was this instruction helpful to you?
Thank you for voting!
Customer:
outstanding from Galena, MD
Parts Used:
WPR9800486
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
microwave would not heat.
hardest part was taking the microwave down off of the wall to gain access to the diode. Thought if was the transformer but ended up being just a blown diode. remove and replace and bench test. that part took 15 minutes . moral of the story don't boil water under the side of the microwave that holds the electric components.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SMH7174BC
16 - 27 of 27