RVM225WL002 General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Elizabeth from Santa Rosa, CA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door handle broke
I removed the one screw, the other end was broke. Replaced the handle. At first it didn't screw in tight, so I turned it around and put in both screws and bingo, good as new. Thanks for your quick response. Was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- steven from wilsom, NC
- Parts Used:
- WB15X322
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
handle didn't come w/new screws
I had to shim the outside to get the door tight,the original screws are longer than what the current handle requires.For the price ,new screws should be a part of the package.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eugene from Elkridge, MD
- Parts Used:
- WB15X322, WB06X10140
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Microwave Door Handle broke at bottom
When I tried to remove the handle, I discovered someone (teenage step daughters) attempted to glue the broken handle to hide the fact that it was broken. It did not work. The handle broke again, leaving part of the handle assemply suck in the door. I had to use a cordless drill to drill out the glued in portion of the handle. Fortunately, when the drill bit dug it, it broke the glue seal and the broken insert came out. After that, it was a breeze to install the replacement door handle.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Waterford, WI
- Parts Used:
- WB08X10016
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Burned out bulb
Screwed in new bulb.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Warren from Council Bluffs, IA
- Parts Used:
- WB36X10003, WB08X10016
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The bulbs burned out, the glass lens cracked and the light socket broke when trying to remove the bulb
Replaced the sockets, lens and bulbs. The first time the new bulb was touching the lens and the heat broke the lens and burnt out the bulb. The second time I adjusted the socket so that the bulb does not touch the lens.
Impressed by how quickly the parts arrived after the order was submitted. Two days.
Thank you.
Impressed by how quickly the parts arrived after the order was submitted. Two days.
Thank you.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from Forest Hills Gdns., NY
- Parts Used:
- WB06X10140
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One support always fell out/ other was fried to the wall
Because of it's age and my memory of it's wall installation problems, I was extremely happy to find the parts. Merely popped the old "fried " support bracket out, snapped it the two replacement brackets and I was back in business with a "new" spark free appliance. Thanks ever so much! Smooth, "no brainer" installation! Extremely pleased with results!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Douglas from Ludington, MI
- Parts Used:
- WB08X10016
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Bulb broke in light socket
Tyring to get bulb out i ruined the light socket. Unscrewed the bottom cover of microware. Took out screw holding light socket, removed wires to socket with pliers, intsalled new socket. It was a piece of cake and the part was a perfect match.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JAMES from PISGAH FOREST, NC
- Parts Used:
- WB06X10140
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Bent, Broken, Melted rack support
Ordered new support (price was less than Postage) Ordered for Microwave, should have ordered for Convection Microwave. Filed side SS to fit part ordered, after much filing got the new part (wrong) into the side panel. Looks great, wrong color but should be OK/
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Leon F. from Brookline, MA
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Right hand surface lamp burned out. It apparently fald up and broke the glass cover. I wne on line when I found out the only local deaaler was some miles away and more expensive.
Simple. The parts came instantly. The glass was too big so I had it cut to size. I unscrewed the fixture with a screw driver replaced the bulb and slipped the glass cover into the frame and screwed the whole assembly in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Hugh M. from Overland Park, KS
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken handle on the microwave
Removed the 2 screws at the inside of the microwave door-can't miss them, removed the handle. I think it took more time to clean the area around the handle on the front of the door than it did to replace it. Anyway, held the new handle in place and re-attached the 2 screws and it was done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from Justice, IL
- Parts Used:
- WB36X10003, WB08X10016
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
bulb burned out -cracked holder lamp
pluged wires back on ,placed lamp holder and bulb back and replaced screws
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Marina Del Rey, CA
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light bulb wouldn't light.
Removed difuser (one screw), removed old bulb, screwed in new bulb, replaced difuser.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from Michigan City, IN
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
microwave door handle was broked
I removed the old handle and replaced it with the new handle. Using the two screws from the old handle. It took about 5 minutes to complete the job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lillie from Franklinville, NC
- Parts Used:
- WB15X322
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Screws with appliance seemed a little big for holes in new handle
First I removed the two screws that held the handle on. Then I laid the handle down in the way it was on the microwave to be sure I didn't put the new handle on up side down. It appeared only one way to put the handle on. The screws were a little difficult to screw in all the way. First time doing something like this and I was afraid I'd break the new handle. So I had my son to help. No problem once the handle was attached properly. Thank you so much for the quick delivery. The handle works perfectly now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Waldorf, MD
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Interior Light Out
Removed Cover Plate,
Removed back cover
Bulb disintegrated removed base with pliers
Screwed in new lamp
Replaced cover
Done
Removed back cover
Bulb disintegrated removed base with pliers
Screwed in new lamp
Replaced cover
Done
Was this instruction helpful to you?
Thank you for voting!