JNM3161DF1WW General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Juan from FONTANA, CA
- Parts Used:
- WB27X11210
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
My microwave started tripping the breaker
Yes, it started tripping the breaker and at the end it wouldn't work at all, I started checking continuity on all door switches everything checked good, then I proceeded to check the thermostats and found out that one didnt have continuity so I replaced it. Every thing works good except that as soon as I pluged the microwave to the outlet the exhaust fan comes on and does not shut off. Does anyone known why or do I need to change something else.
Thanks
Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doug from CHALFONT, PA
- Parts Used:
- WB02X11550
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Warning light came on to replace
Ok. Surprised I was sent a damaged part. Box was intact but the aluminum frame was bent. Looks like I received a factory reject. I was able to make it fit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MS Bettie J from RIVERDALE PK, MD
- Parts Used:
- WB02X11550
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed filter
Open main door at the top is small door open take out old filter and replace newone
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cal from LITCHVILLE, ND
- Parts Used:
- WB27X11208
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
The microwave quit working, yet it had power to the plug.
I took the microwave off the wall and unplugged it, then removed the covering. Then I plugged it back in and took voltage readings at the cord terminal lugs. Then I tested the voltage after the fuse and at every point , following the wire. When I got to the upper heat sensor, which is mounted above the oven cavity, I found that the voltage readings stopped. Also, the wiring sleeve was burnt. I removed the part, then ordered it on line. After re-assembly, it worked. Nice.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from SAN TAN VLY, AZ
- Parts Used:
- WB10X32782
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The door wound not shut right or lock
Used the puddy knife to open up the door and then used a screw driver to change the old part with the new one. That easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from SUMMERFIELD, FL
- Parts Used:
- WB06X10625
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
noisy microwave turntable
I never knew why it made noise till I looked at the break down on this web site and found it was missing rotating ring since it was new. But unfortunately, I never received turntable ring which was ordered on 12/19/2022 now its tracking says Wednesday, 12/21/2022
9:36 AM
In transit
CAMP HILL, AL it has been stuck there all this time still not on its way to Florida. I don't understand did fedx put on southwest airlines?
9:36 AM
In transit
CAMP HILL, AL it has been stuck there all this time still not on its way to Florida. I don't understand did fedx put on southwest airlines?
Was this instruction helpful to you?
Thank you for voting!