AMV5206BAS Amana Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- al from lexington, SC
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Tray inside would not rotate
Removed old coupler with my fingers and installed new one on shaft. Works fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Juel from White Bear Lake, MN
- Parts Used:
- 4713-001165
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Bulb burned out
Replaced the bulb
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Paso Robles, CA
- Parts Used:
- WPW10126786
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Wrench set
microwave acts like its working but won't heat.
Replaced the magnetron and diode. Microwave works prefect now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Tipton, MI
- Parts Used:
- WPDE31-10172A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
motor was slipping
replaced the drive motor and coupler coupler from samsung parts
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vicki from Phoenix, AZ
- Parts Used:
- 6802A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave Vent Hood Filters
Not so sure this would qualify as "instructions", but I only needed a screwdriver because the "D" rings of the old vent filters broke off and I had to pry to old ones out. Keep in mind, I am mechanically disadvantaged and can barely change an A/C filter ... that being said, all I did for this order was input my Model number and PartSelect found the correct replacement part. I receive the parts super quick (faster than the other 2 purchases I did that day). The only bummer was the packaging ... super huge box for small tiny parts. Otherwise, I now know where to go for replacement parts. This project should be a "no-brainer" for most DYI's, so getting the right parts with just a model number was lifesaving for me :0)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenn from Pedricktown, NJ
- Parts Used:
- DE47-20059B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
no power
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- scott from milwaukee, WI
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Table Will Not Spin
Try to turn Coupler. If it is loose it is broken 1. pull old one out 2. line up keyway on new one and press it in. (If mild resistance was felt while turning coupler it is not coupler most likely drive motor)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nanci from Boerne, TX
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken coupling on turntable
Just placed it in. Ordered, received in less than a week and it was working in minutes after being broken for 6 months Thank you!!!!!!!!!!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- penny from akron, OH
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the coupling was broken on my turntable
itt slipped right in, works great. thanks so much. If not for the reviews and no picture of the part, I would not have known what to order. thanks again
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Simsbury, CT
- Parts Used:
- DE63-00367D
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
change old filter
replace filter according instruction
Was this instruction helpful to you?
Thank you for voting!