10689582706 Kenmore Ice Maker - Parts

Used with stand-alone ice cube makers.

There is approximately 10'of wire. Note:2 kits are needed to replace both directions.

This is an ice cutter grid assembly for your ice maker. If your machine is not producing ice properly, the assembly may need replacing. You will find this part in the main unit of the ice maker. The t...

This part is located in the water pump area of the ice cube maker.

This part is a drain pump for your ice maker. When you flush the reservoir on your ice maker to remove impurities, the drain pump is the part that removes the water from the reservoir. This is an auth...

The water distributor tube distributes water from the reservoir to the evaporator plate.

The connection ports on the water inlet valve are John Guess fittings. To remove, it is recommend to push the line in and then hold the ring in. While holding the ring in, pull the line out. To re-ins...

This water bucket provides contained storage for collected water or ice within the appliance. Its durable construction supports regular removal and cleaning. Replacing a cracked or damaged bucket help...

This part includes the recirculation pump and motor sensor.

Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.

This screw is sold individually.