KFP600BU KitchenAid Food Processor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gretchen M from Pittsburg, PA
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old one did not latch.
Put it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Van Nuys, CA
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lid to the bowl of my food processor broke
I got the part within a few days and it fits fine. I am glad that I don't have to replace a perfectly working 15 years old food processor just for a broken lid. Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Orem, UT
- Parts Used:
- 4176267
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My old bowl broke-the handle came apart.
Placed it on the processor, and turned it into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patrick from Santa Clara, CA
- Parts Used:
- 4176602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lost disk support
Support slides easily over the motor drive shaft.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lawrence B from Georgetown, DE
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cracked food processor top
Bowl top for older model KitchenAid Food Processor. Old one had cracked at seams after 12 years. New part was exact replacement; very glad to have found one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andrew from Pinckney, MI
- Parts Used:
- 4176602
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Lost Disc Support
I lost my disc support...Good news I found it... when I turned on my garbage disposal...Bad news it didn't support a disc any more...Good News you had one...Now my disc is supported. Thanks for the support!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert J from Flanders, NJ
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
KitcheAid Food Processer top Cracked.
Just twisted the new one in place in seconds. Very fast shipping, got the part in two days. Very satisfied.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yvonne from Portage, PA
- Parts Used:
- 4176602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
blade stem wore out for my food prcessor
I had ordered 2 new stems several weeks ago. The parts never arrived. I called about the order and the parts were delivered within a few days.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Boynton Beach, FL
- Parts Used:
- 4176267
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I broke the workbowl trying to get the cover off after uncucessfully trying to grate some cheese. No way to get cover off without breaking both parts.
I had a spare cover since I have done this before and I just ordered another workbowl. Just put them on and operate. Now I keep a spare of each on hand in case I do something dumb again. Love my food processor and use it every day.
Was this instruction helpful to you?
Thank you for voting!
Bowl and lid cracked and brittle.
Just put new parts on. Cleaning by hand instead of dishwasher will help this and all hard plastic items last much longer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sally from Menomonee Falls, WI
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bowl cover cracked
The bowl cover for my KitchenAid food processor was cracked in several places from having been droped a couple of times over the years. While the cover still works, I wanted to hedge my bets by getting a replacement now. One more drop and who knows.... Bowl cover fits perfectly onto existing bowl; the measuring cup/pusher fits the top perfectly as well. Absolutely awesome delivery service--ordered in the afternoon, and the next day it was delivered to our door. Will definitely visit this site when other needs arise.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Treva from Wichita Falls, TX
- Parts Used:
- WP4176313
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The platic shaft was broken.
The plastic shaft was split in several places. I used a screw driver to pop it off the metal shaft. When the new part arrived I slipped it in place and the food processor is back in working order. I was attempting to buy one from Ebay when I saw the advertisement for parts at the bottom of the ebay item. I thought why not try to fix it. I fixed it and I might as I am female and 73 years old. GO W O M A N .....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gloria from Fredericktown, MO
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The locking part had broken off the lid of my food processor making it inoperable.
I put the new bowl cover on & it worked perfectly. I was surprised how easy it was to locate the correct part. Also, it arrived in just a few days, much to my surprise. All in all, it was a great experience. Thank you very much.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GORDON from BLUE DIAMOND, NV
- Parts Used:
- 4176269
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Blade would not turn.
Through the old blade away and slipped the new one on. No Problem!!! Gordon , , NV
Was this instruction helpful to you?
Thank you for voting!