KFP600BU KitchenAid Food Processor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ann from Tallahassee, FL
- Parts Used:
- 4176602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replacing part in food processor
We were really impressed with how quickly this part was shipped. We needed it fast, and it arrived fast. We will definitely come back to this seller whenever we need appliance parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norma from Jackson, TN
- Parts Used:
- 4176602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I lost the part that had control of the blades. It was very hard finding the right company that had the part. Thank goodness you resued me.
Just put it in the processor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joel from DEcatur, GA
- Parts Used:
- 4176265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Threw the blade away by accident to the food processor
Put it in the bowl it fit perfectly, After we lost the orgianal blade my wife was ready to throw the whole food processor away. You saved me I figure $150.00
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Birmingham, AL
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I had lost the bowl cover for my food processor and placed an order one day and unbelievably received it the next day!
I didn't have a big repair to do, but was so impressed with PartSelect's rapid response to get me the part that I needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from Alexandria, LA
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bowl cover was cracked and worn out
Removed old bowl cover; threw it away and placed new cover on the processor. Then rocked and rolled with the cooking!!!
Was this instruction helpful to you?
Thank you for voting!
The original Bowl cover and Mixer bowl with handle showed cracks and showed signs of aging
With the replacement parts substituted the above parts. Since the parts are made of transparent plastic, the closure was little tight in the beginning. I had to oil (with edible oil) the inside of the bowl at the edges and now it works smoothly. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joel from Decatur, GA
- Parts Used:
- 4176267
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My wife cracked the main bowl on the food processor
The tough part was finding the right size bowl as there were several bowls listed, Joelle B was very heloful and actually sent me pictures with measurements to find the right one. Food processor saved.
Was this instruction helpful to you?
Thank you for voting!
Lid and bowl were not meeting due to a lot of use.I could not see discarding a perfectly good machine so I searched for parts.
Finally both parts arrived. When putting the two together on the machine I must say it was a bit tight and is not going all the way in but works just fine. I can live with it.
Was this instruction helpful to you?
Thank you for voting!
I wanted to order an extra bowl and cover for my food processor.
I looked online and called Parts Select. The gentleman on the phone was very helpful and made sure I got the right parts. They came within 4 days and now my processor is working again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from San Diego, CA
- Parts Used:
- 4176263
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old bowl cover was broken
installed new bowl cover
Was this instruction helpful to you?
Thank you for voting!
After 12 years of hard use, my bowl for the processor broke.
I ordered a new bowl and a new cover and just put them on! The man I spoke with on the phone was very helpful and I got the parts in less than 4 days! What a delight to know I did not have to buy a new food processor. It should last another 12 years!
Was this instruction helpful to you?
Thank you for voting!
Worn out bowl cover and bowl
Repaced both cover and bowl due to wear and tear. Need to get both parts since, there was a minor design change where the cover meets the handle on the bowl. Everything fits perfectly over the food proceesor and now it looks brand new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ann from Emmett, ID
- Parts Used:
- 4176602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lost shaft that holds disc
new part looked different thanthe lost one, but worked the same. I'm happy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ELIZABETH from HAWTHORNE, NY
- Parts Used:
- 4176602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lost the support piece for the slicing dics
just popped it on & it worked
Was this instruction helpful to you?
Thank you for voting!