7MMGDC300DW3 Whirlpool Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from WASHOUGAL, WA
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken handle
removed and replaced door handle no tools required
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Jane from WESTHOFF, TX
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
plastic handle broke
Replacement handle snapped right back in place. Took about 2 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from GRESHAM, OR
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle on dryer door broke.
The part arrived in the mail. I used a pair of kitchen scissors to open the package. I removed the part from the plastic bag, and snapped it into place on the front of the dryer. Total time: 15 seconds.
I wish all my repairs were this easy.
I wish all my repairs were this easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from MIDDLEBORO, MA
- Parts Used:
- W10861225
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broke handle on dryer and replaced it with a new one
Followed the directions and just snapped the new handle in place
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Leo, IN
- Parts Used:
- WPW10185992
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Timer would not advance from set time.
Consulted Parts Select site for timer. Unplugged dryer piwer. Removed 6 screws from top console back, then timer itself by removing 2 screws. Moved electrical connections from old to new timer. Reinstalled timer screws and then console back screws. Plugged it in and all was good!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Geri from COUNTRYSIDE, IL
- Parts Used:
- W11050897
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
was not heating
remove back of dryer and install part same as old part was installed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vincent from RAYMOND, MS
- Parts Used:
- W10861521
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Seal damage
Very simple remove door pull off old seal, apply small amount of adhesive around seal seat. Install seal to door let cure for several hours over night is best
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from HUDSON, WI
- Parts Used:
- WPW10185992
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Timer on my dryer would not rotate so dryer would not turn off
With the help of YouTube, I diagnosed the problem, ordered the part, and with more help from YouTube, changed out the timer. My husband was impressed and I saved a few hundred dollars on a service call. :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Sweet Water, AL
- Parts Used:
- WPW10185992
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Timer Stem broke
Turned power off. Removed panel. Unplug the wiring harness from old timer. Removed old timer. Replaced timer. Plugged the wiring harness back into new timer. Put panel back on. Turned power back on . Checked out . Thanks for the great service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from COLUMBIA, MD
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle on the dryer broke
This was super simple - even I could do it! I followed the 3-step instructions which basically described how to hold the new handle and pushed it into the holes in the door. Less than 30 seconds and no tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from CUMMING, GA
- Parts Used:
- WPW10185992
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
My timer would not shut off
Very simple. Unplugged. removed top back panel. Removed two screws from timer. Removed wire one at a time replacing them in new timer. Then reassembled
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from REXFORD, NY
- Parts Used:
- WPW10185992
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer timer know broke
Took the 4 small screws holding the back plate in place off. Then removed all the wiring clips from the old timer. Removed the 2 screws holding the timer in place, then removed the timer and the last wiring clips. Put the new timer in place and then put all the wiring clips back on. Closed up the panel and moved the dryer back into place. Total time was about 20 min.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gayle from TEXAS CITY, TX
- Parts Used:
- W10861225
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken dryer door handy.
Just popped it into place. Was very easy. Took less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- susan from SAUSALITO, CA
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
handle from dryer broke off and couldn't snap it back in place.
We didn't even look at the instructions. Just rotated the handle until it snapped back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beverly A from MANHATTAN, KS
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke off door of clothes dryer.
New handle just snapped in - really easy. Have to compliment Part Select - I ordered handle one day and it was delivered the next day. Impressive!
Was this instruction helpful to you?
Thank you for voting!