Models > 7MMGDC300DW3 > Instructions

7MMGDC300DW3 Whirlpool Dryer - Instructions

Jump to:

All Instructions for the 7MMGDC300DW3
1 - 15 of 66
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dawn from AUSTIN, TX
Parts Used:
W10861225
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The handle to the dryer broke.
Replacement handle snapped in place very easily.
73 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from DALLAS, TX
Parts Used:
W10861225
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dryer handle to open door broke
took the old one off and pooped in the new one!
40 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Billy from Maryville, TN
Parts Used:
49572A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
cocverting natural gas to propane gas
removed burner installed propane orfice and kit as per instruction sheet.
43 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leonard from Lemitar, NM
Parts Used:
49572A
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Convert gas dryer to Propane
Received conversion kit. Removed front dryer panel,2 screws. Removed burner tube, 2 screws then removed natural gas orfice.
Installed propane orfice and repalced burner tube.
Removed regulater plug and replaced with new plug from kit using 90 degree ratchet screw driver. Approximately 20 minutes. Dryer working great.
25 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Manolak from MURFREESBORO, TN
Parts Used:
W10861521
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Door Gasket tore out
Put high temperature glue on first, then put door gasket over the high temperature glue and then let it set for 24 hours. It worked fine....
16 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randy from Brentwood, CA
Parts Used:
8541503
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Placing Dryer on Top of Washing Machine with Stack Kit
I purchased a stack kit from "Part select.com". The item was just what I needed to do the job. The delivery of the part was made the next morning. WOW! Excellent service! The process was completed in less than 24 hours, start to finish. Very impressed!
25 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from CORNING, IA
Parts Used:
W10861225
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
My dryer handle broke off when i opened it
My son got it in the mail for me and snapped it right back on.
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elouise from ORLANDO, FL
Parts Used:
W10861225
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The handle to my dryer broke
Just popped it into place needing no tools at all. Took less than a minute.
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Palmdale, CA
Parts Used:
49572A
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
LP gas conversion
Followed instructions, except to advoid sharp edges, and completed the job in under an hour.
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from The Rock, GA
Parts Used:
49572A
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Had to convert from natural gas to propane
Well, here's the rub...in order to find out what part I needed to order, I needed to take the dryer apart to where the gas controls are, and there on a sticker was a part number for an LP conversion kit. But, in order to get to that gas valve unit, I fumbled about figuring out how to take this brand new dryer apart, since there were absolutely no instructions whatsoever in the owners manual. And once apart, and pretty much all apart, I wondered how it would be that the Maytag repair man would be so lonely, as he'd have plenty to do.
However, the kit had great instructions as to how to take it apart and change out the orifices.
12 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jane from HOUSTON, TX
Parts Used:
WPW10185992
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
knob stem broke. had to replace the whole timer.
Took off back panel. unscrew timer. unplug wire and replace new wires from new timer, one at a time to make sure plugged to right terminals. screw back on the new timer. replace back panel.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tammy from SEVIERVILLE, TN
Parts Used:
W10861225
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
I had to order a new part to open and close my Amana dryer
I received the part and was able to get this on my dryer in just a few minutes. I would use this company again if I have any issues with my products at home.
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from BEDFORD, TX
Parts Used:
W10861225
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Door handle broke
Went to the site for instructions. Received a nice set of three photos with detailed instruction. Very easy to follow and item just snapped in. If I hadn't looked up the instructions I would have probably risked breaking the new part.
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
steve from STOCKTON, NJ
Parts Used:
W10861225
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
replaced handle on dryer
lined up the holes and pushed. 2 second repair.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from AUBURNDALE, FL
Parts Used:
W10861225
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Dryer Handle
Easy, just snapped it
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 7MMGDC300DW3
1 - 15 of 66