7761A-71 Norge Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Robert from Rancho Mirage, CA
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door catch, male portion, broke off
Popped in the new part. Really! That easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Luis from Arlington, MA
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door wouldn't stay closed
I used a screwdriver to pry out the broken door latch and inserted the new one in the same slot. Perfect fit. The picture of the part in the order page was a big help to identify the correct part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ian from Greeley, CO
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door would not stay closed because metal latch piece was gone.
I ordered the part. ( I should have ordered just in case it happens again.) When it got here it took less than a minute to snap it in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wayne from Columbiana, OH
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door Catch broken
The old door catch broke and fell into the unit. Ordered the new part which arrived fast and snapped it into place. Perfect fit and the door now closes/latches correctly - like new again. Would recommend your web site to all do-it-yourselfers. Loved browsing your site, especially seeing all of the schematics and parts list for my unit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Altoona, IA
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original lint filter was separating at the edges
Removed the old lint filter and slid in the new one. It took me longer to get the box open to get the new lint filter out than it did to actually replace the part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Orient, OH
- Parts Used:
- 53-1518
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Terminal block and power cord melted.
Removed power cord and terminal block and replaced with new ones. Still could'nt find why dryer would not run. Founed I had not hooked up one of the power wires as it had turned up so it couldnt be seen. Hooked it up and dryer runs like new. Thanks for the quick shipment.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Russell from Alexandria, KY
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Install new latch
Just snapped the new plastic latch into the hole (the hole was there because in trying to extract the old latch, it fell into the inside of the door). Took two seconds. Order to arrival of the part took only 22 hours!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marty from Sterling heights, MI
- Parts Used:
- W10410996, 31001465, WP31001344
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Squealing Berring
I had to replace the whole motor, Idler spring and idler Pulley Wheel. It went well but I wish I could have replaced just the berring and not the whole motor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ada from Albion, NY
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint filter mesh had tears on it.
just replaced the part. I was happy how simple it is to order the parts from PartSelect, and be able to get the right measurement needed.plus how fast it came.
Thank You and Keep up the good work. Ada APONTE
Thank You and Keep up the good work. Ada APONTE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sarah from Cumming, GA
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
tear in old filter
There was no reair needed. We just needed to replace the filter. The new filter arrived in a very short time and now we are drying clothes without losing lint through the dryer vent.
Ordering was easy with just the model and filter number which was listed on the dryer door. I was even given a diagram on the computer screen as to where to locate all the parts numbers needed.
This was a very satisfying order experience!
Ordering was easy with just the model and filter number which was listed on the dryer door. I was even given a diagram on the computer screen as to where to locate all the parts numbers needed.
This was a very satisfying order experience!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julia from Randolph, NJ
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint Screen was cracked.
I threw out the cracked lint screen and put the new one in it's place. I don't know why I waited so long to order the replacement part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from North Windham, CT
- Parts Used:
- WP31001529
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door seal was dry rotted
carefully pulled out old seal, then popped in new seal
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pamela from Little River, KS
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
need new lint filter
I bought from you and received part in timely manner. I got it out of the box and replaced. It's better than the one I got new with dryer. Thanks, P.Blades.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Berkeley, IL
- Parts Used:
- WP53-0918, WP31001529
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer time is very long. Lint not collecting.
I removed the old door seal and installed the new one algining the slots with the inserts and the seals. Old filter out, new filter in. Install was successful but dryer still not drying even though it's producing heat. I guess I will need a replacement.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Kirkland, WA
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
latch broke
Replace with new latch.
Was this instruction helpful to you?
Thank you for voting!