11065202311 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gordon from PALATKA, FL
- Parts Used:
- WPW10185982
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Timer stopped working
Used your video, went very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cindy from GATES, TN
- Parts Used:
- WPW10185982
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Dryer was not heating and sometimes would not start at all
Unplugged dryer
Removed back
Removed knob and screw from front and 2 screws from the timer in the back unplugged one wire at a time and replaced one at a time.
Dryer working great.
Removed back
Removed knob and screw from front and 2 screws from the timer in the back unplugged one wire at a time and replaced one at a time.
Dryer working great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andrew from MANAHAWKIN, NJ
- Parts Used:
- WPW10185982
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
TIMER WENT BAD AND KNOB BROKE OFF
I REMOVED THE OLD TIMER AND INSTALLED THE NEW ONE. ALL I NEEDED WAS A 3/8 SOCKET AND IT TOOK LESS THAN 15 MINUTES. I USUALLY CANNOT FIX ANYTHING AND THIS WAS VERY SIMPLE AND THE VIDEO SHOWED ME EXACTLY WHAT TO DO. THE PART IS WORKING OK SO FAR.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOE from AQUEBOGUE, NY
- Parts Used:
- WPW10185982
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
DRYER RUNS BUT DOES NOT GET HOT
OPENED REAR OF DRYER TOP PANEL, TESTED FOR CONTINUITY ON TIMER, ALL TEMP SENSORS AND HEATER COIL WITH MULTI-MEETER AS DESCRIBED IN ONLINE YOUTUBE VIDEO FOR WHIRLPOOL DRYERS. TIMER TESTED BAD AND REPLACED TIMER. EASY TO UNSCREW AND UNPLUG.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Y from ROCKVILLE CTR, NY
- Parts Used:
- W10874409
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Corner of old lint filter screen broke away from its frame.
Went on-line Chat and described my problem to a very professional and patient representative who requested the necessary information needed to replace my filter. Note: Due to the age of the my dryer, Sears no longer had a replacement. I'm thankful that this site was able to accomodate my need.
The repair, or should I say replacement, was as simple as pulling out the old filter and replacing it with new. Only tools, my two hands.
The repair, or should I say replacement, was as simple as pulling out the old filter and replacing it with new. Only tools, my two hands.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet A. from NACHES, WA
- Parts Used:
- W10874409
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
THE FILTER SCREEN MY MY KENMORE DRYER WAS GETTING RAGGED AND SHARP AS IT PULLED AWAY FROM THE FRAMEWORK. I KEPT CUTTING MYSELF PLUS WAS CONCERNED THAT SOME OF THE LINT WAS WAS NOT BEING FILTERED OUT.
IT WAS EASY, TOOK OUT THE OLD ONE AND PUT IN THE NEW ONE!! ANY ONE COULD DO IT.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yvette Joan from DUSON, LA
- Parts Used:
- WPW10185982
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
No problem
My son did the repair and said it was so easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marsha from SEARCY, AR
- Parts Used:
- W10874409
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- Less than 15 mins
lint screen damaged . Orordered part but did not receive it. Instead received various parts to repair clothe washer.
Item not repaired as did not receive my order. I did call the company and they said they would credit my card. Neither they nor the company the wrong order came from seemed interested in my efforts to return the wrong order. I feel this incredibly wasteful,. I would not order from a company with this attitude
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Seneca, PA
- Parts Used:
- W10874409
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Side of lint filter (screen) cracked and broke off.
Pulled the old lint filter out and threw it in the trash. Slid the new filter in and it was all done. Doesn't take a genius to do this repair. My old dryer a sears/kenmore is over 40 years old and the lint filter fit perfect. (MF part number w10874409)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bernette from LONG BEACH, CA
- Parts Used:
- W10874409
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
handle on old dryer screen had broken off
Removed old screen. Placed in new screen.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marianne from OCALA, FL
- Parts Used:
- W10874409
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken
It fit like a glove. Just put it right in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from PARADISE, MT
- Parts Used:
- WPW10185982
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Easy
Took the back off with nut driver and took out defective timer. Then put in new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- howard from hamlet, NC
- Parts Used:
- WPW10185982
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
dryer would not heat up consistently, if at all on any cycle.
Remove all plugs and connectors off of the old timer and reinstalled and mounted the new timer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Veda Jean from Sedilia, CO
- Parts Used:
- WPW10185982
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Automatic dry setting worked but no heat on time dry setting
Replacing the timer fixed this problem. In the center of the timer there is a socket that was hard for me to remove. I had to use a small standard screw driver to push down the middle center plastic piece while someone else was gently pulling on the socket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melanie from Staples, MN
- Parts Used:
- W10874409
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
The lint screen was broken
I ordered a new lint screen to replace the old. I used the part #. They only had "similar" products, not one exactly like mine. When the new part arrived, I had to take IT apart and use part of the new with part of the old, to get a working lint screen. I was able to do it only because of my internal sense of mechanics...and I am proud to say I am a woman!
Was this instruction helpful to you?
Thank you for voting!