110C60222511 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from North Bellmore, NY
- Parts Used:
- 4392065
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Broken belt
I did as your online movie said to do it. It is a big help and you can see that the belt, rollers and idler pulley is not a difficult job and you save yourself at least $100. Toughest part of job is putting back the nylon triangle things that hold the rollers on without breaking them.That is why I used the needlenose pliers. The triangle things that hold on the rollers have little tabs on them and I just gently pulled them outward and the triangles went right on.That repair kit from Whirlpool(builder of my Kenmore dryer)was a real bargain and everything fit perfectly. Bottom line is don't be afraid to try this repair. You will most likely succede. Go out to diner with the money you saved. Good luck, Mike
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Point Pleasant, NJ
- Parts Used:
- 4392065
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
dryer was working fine, just very noisy during operation. wump,wump,wump
watched the online video on the Partselect site which was very informative and straight forward. replaced the belt, tensioner, and two drum rollers (all included in the maintenance kit, (along with small hardware parts)). put it all back together, and VIOLA!!!!!! super quiet like the day we bought it!!! Thanks!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLIAM from DELRAY BEACH, FL
- Parts Used:
- 4392065
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Broken Dryer Belt
Ordered entire Maintenance kit - good call because it was the tensioner pulley that failed and cut the belt. To replace, had to raise the top (2 screws in lint screen slot)and pull the entire front off (2 screws - 1/ea on top inner edge of front door panel then lift it up and out) Replaced both rollers, then used the parts kit shipping box to prop up the front of the drum while installing the belt and tensioner pully. Re-assembled in reverse order, works fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Natale from Brooklyn, NY
- Parts Used:
- 4392065
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Dryer making squealing noise
Followed the directions on the web site. made a hook out of a wire hanger to hold the drum in place (hook from the back frame to the front of the drum) while I set the belt tensioner in place. removed the hook and the rest was easy.Works Great!!! like a new machine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from N Chelmsford, MA
- Parts Used:
- 4392065
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
drumbelt broken
Used a ropeasround the dyer drum to simulate thebelt to peload the idler This allowed me to get the belt over the motor shaft without the idler sping tenion causing the idler to jump at random timesafer I strted using the rope the belt was on in 10 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pat from Zebulon, NC
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The clip that holds the plastic handle to the lint screen broke off.
The new lint screen fit perfectly. All I had to do was slip it in the lint filter slot.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ellen from Burlington, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old filter broke
took out old put in new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Billerica, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint screen was worn and not working properly
removed old screen and replaced with new one.I would like to add that PartSelect was the only place i could find the part at a reasonable price, and that it was delivered in record time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Calvin from Saco, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter was broken
Tried to replace filter would not fit It was delivered outside and was real cold and stiff after I let it set for awhile it warmed up it fit great. Thank you Calvin
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Dudley, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter handle broke
Slid the new lint filter into slot on top of my 26 year-old Kenmore dryer and it fit perfectly! Ordered part and received it the next day...unbelievable!! Definitely A+ service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Palatka, FL
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replaced lint filter
The part was delivered when promised. Part was a perfect fit. I was very pleased with the entire process.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christian from Battle Creek, MI
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint Filter mesh was frayed.
Purchased a new lint filter. Delivery and installation were no problems. The easiest repair that I've ever done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from York, PA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old lint filter was broken
All I had to do was take out the broken filter and replace it with the new one. It fit perfectly. The replacement took less than 5 minutes. I should have done it a year ago!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from Wyncote, PA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old lint screen was torn and in need of replacement
The replacement that was ordered was a perfect fit for the worn part and merely required placement into the lint screen area. The entire procedure, from ordering the part, to installation was amazingly easy. I would not hesitate to order future parts from PartSelect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy from Kingsbury, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint screen broken
Open box, insert lint screen!
Was this instruction helpful to you?
Thank you for voting!