110C60222510 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from BEAVERCREEK, OH
- Parts Used:
- WP3977767
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
taking to long to dry
put the high limit in , plus the temperature , plus the exhaust switches
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- scott from missouri city, TX
- Parts Used:
- 279816
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
no heat from the dryer
first i removed the back cover by removing the six 1/4 inch screws then i removed the wires to the thermal switch there were three of them and using an ohm meter i checked each one for continuity until i found the one that had an open circuit. i removed the two 1/4 inch screws holding it in place and replaced it with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Audrey from North Miami, FL
- Parts Used:
- 279816
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
dryer was not heating anymore
removed the back housing of the dryer and located the thermal switch. unscrewed the old one, popped in the new one and whala! I was back in business!
put the back cover back on the dryer and pushed it back into place.
put the back cover back on the dryer and pushed it back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stacey from Corinth, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the handle had broken on the lint filter so i had fashioned paper clips into the holes to get the filter out
after i got the replacement filter, it fit perfectly. the filter is white & my dryer is beige but i don't care...i'm just happy i have a good lint filter again, for my at least 30 year old dryer....thanks part select!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from Lindsay, CA
- Parts Used:
- 279441
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
The dryer tub became jammed, unable to turn.
I followed disassembly directions found on youtube and replaced th two-piece ring bearing that was identified by a parts diagra fron PartSelect. The repair was easy. Fix time was about thirty mionutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SYDNEY from BOSTON, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Needed a new filter screen for Kenmore Dryer
Pulled out the very old worn out and damaged filter screen and replaced it with a new filter screen.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maura from Burbank, IL
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen was broken - replaced it with a new one.
There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from KOKOMO, IN
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke
Placed lint filter in opening and pushed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy (Hairways) from WOODMERE, OH
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen had hole and looked like it was scorched
Just slide out lint remover and inserted new one. Very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- moujin from CARMEL, IN
- Parts Used:
- WP3977767
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
no heat only
repairing is pretty straightforward.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anne from GLEN COVE, NY
- Parts Used:
- WP3387134
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
dryer ran but was not making heat
followed the instructions on this site. to find the problem. checked the coil, thermostats and fuse with my multimeter. Found the bad one, order the part and put it in. It was very simple and now my 20 year old dryer works again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carmen from CUSHING, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Had a torn lint filter
Removed replacement from box. Threw old one out, the new one fit perfectly, and securely.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ed from GRAFTON, IL
- Parts Used:
- WP3387134
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Clothes never completely dry
I watched the video then called them to order parts. They were VERY helpful & NICE. I had the parts the NEXT day. I followed the video instructions & it worked. They made my day! THANK YOU JoAnn & Teresa!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roberta from VIRGINIA BCH, VA
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Needed to replace lint filter on my 25 yr old me more dryer
Easily installed lint filter for my 25 yr old dryer Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beatrice from WALTHAM, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced the dryer lint screen filter
removed the old damaged filter and replaced with the new one
Was this instruction helpful to you?
Thank you for voting!