11066134610 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from NORTH HAVEN, CT
- Parts Used:
- W11429587
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Catch broke
Unscrewed the inside part of the door from the outside door shell. Removed the broken pieces of the catch and replaced it with the new one. Screw the door back together. Did not need to remove the door from the dryer cabinet.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randell from TURLOCK, CA
- Parts Used:
- WP3406107
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bad door switch dryer would not shut off.
Follow the vid it is perfect. The vid came with an email from your company.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marc from Keystone Hights, FL
- Parts Used:
- WP3406107
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dryer wouldn't start
Turned off breaker to dryer. Removed 2 lint trap screws, raised top of dryer & unscrewed switch. Replaced door switch, closed top, replaced the 2 screws that hold lint trap, lowered top, then turned breaker back on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Onedia from PARIS, TX
- Parts Used:
- WP3406107
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light not working and dryer not stopping when door was opened
Removed two screws from under dryer lint screen enabling top to be raised. With top being held up, removed two screws holding door switch then pulled wiring harness apart thus removing old part. Reinstalled new switch in reverse order. Very simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Aaryn from HUNTINGTN BCH, CA
- Parts Used:
- WP3406107
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dryer spinning with door open
Installed new door switch, so, so simple. Unplug dryer, remove lint screen, undo 2 scews located at base of lint screen opening. Use flat head screw driver to pry up dryer top, once open, rest the top against the wall. Now you will see the door switch in the right hand corner at front of the dryer.Open the dryer door , remove 2 screws holding the broken switch, disconnect wire from dryer, click in the new switch, put everything back together, plug in the dryer and go! Super quick and easy, wish I had just done this months ago!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dy`Adra from DOTHAN, AL
- Parts Used:
- WP3406107
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light would not come on when door opened and dryer would not stop.
I removed the part located on the dryer at the top of the door area. I installed the new part with the two screws I removed and BAZINGA...it all worked again. Very pleased!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arthur from N BROOKFIELD, MA
- Parts Used:
- WP3406107
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Switch was hanging limp
This problem occurred Thursday afternoon; after I took out a load of dry clothes, it wouldn't restart. I realized that the switch was busted, it used to click but it was just hanging. Watched the video and ordered it right away. It arrived Saturday morning via Fedex and I installed it in about 5 minutes. It probably took longer to watch the video. 23 bucks and the dryer's running perfectly. I've replaced several parts this way on my appliances, always feels good to do it yourself. Good as new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julie from GREENVILLE, FL
- Parts Used:
- WP3406107
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dryer just stopped working and the light had been out for a while
My husband simply changed the switch and now I could'nt be happier. Thank you for sending the switch so quickly!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from FLORHAM PARK, NJ
- Parts Used:
- WP3406107
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The dryer door switch was broken. The dryer worked but would not stop when the door was open and the light would not come on
Very simple. First, unplug the dryer. Unscrew the 2 screws that hold the lint screen in place and remove the lint screen. Now comes the only complicated part. The video recommends using a putty knife to get the top of the dryer to open. I recommend plastic wedges (you can buy one for less than $1 at a local hardware store; I used 2) because then you will not damage the aluminum, which is very easy to do. Basically you put the wedges (I used two) into the opening and hit then very gently with a hammer and they force the top of the dryer to open. From there you remove the 2 screws that hold the switch in place, unplug the switch (this may take a little bit of effort), plug the new one in, put the screws back in place, put the top back on, screw the lint screen screws back in, put the lint screen back, plug the dryer in and you're good to go. This took all of 10 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beverly A from MANHATTAN, KS
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke off door of clothes dryer.
New handle just snapped in - really easy. Have to compliment Part Select - I ordered handle one day and it was delivered the next day. Impressive!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David E from SUMMERVILLE, SC
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken Door Handle
I snapped the new handle into place, it took 2 seconds. The new handle was made thicker and stronger than original. Its unlikely I will be doing this repair again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Hasso from PALM COAST, FL
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The dryer handle broke.
When I ordered the part over the phone was told it just snaps in. Not sure what it meant. Parts delivery was prompt. Looked at the part and it’s pisition on the dryer.And it really was very simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from DEFIANCE, OH
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
door handle broke
ordered a replacement handle - installed it myswelf
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from LUMBERTON, MS
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
My handlke broke on my dryer.
I opened the package with my new handle in it that I got from PartSelect, and snapped it right in place. No tools needed, took only seconds!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gayle from TEXAS CITY, TX
- Parts Used:
- W10861225
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken dryer door handy.
Just popped it into place. Was very easy. Took less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!