PSKP333EB0WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Anthony from Thomasville, NC
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Knob split
Pulled off old knob and clip. Slid on new knob. Thanks PartSelect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rachel from Spring Valley, NY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
the timer knob would not turn on the dryer
Pulled off the knob, saw it was cracked, therefore it was not turning. The small metal part was stuck on the machine bit that the knob fits on so I pulled it off with a plier. Ordered a new timer knob that came with the metal part inside fit it on by hand in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda D from Middletown, PA
- Parts Used:
- WE1M654
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
crack timer knob
Replace the knob with new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rick from Naperville, IL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer Knob Was Broken
Replaced by hand. Took 5 seconds to repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gene from San Francisco, CA
- Parts Used:
- WE22X35337
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grid Slide -3 plactic nubs broken slide was loose.
Take old grid slide and pannel off. Clean lint trap wire framework and replace. Make sure this trap frame fits snug against the door, otherwise it puts pressure on the new slide. This is the second time I have replaced this Grid Slide. Slid new pannel into grid frame. Ready to go.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BIll from Vero Beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Timer knob would not turn as plastic was broken.
Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ezequiel from Las Vegas, NV
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked timer knob
I had found out that reason the timer knob cracked was because the timer switch was turning very tight and caused the knob to crack and realized that dryer also needed a timer switched witch I also ordered from you. I really like how very helpful parts select is with the instructions you send along with the parts I ordered witch will save alot of time. Thanks For your help Ezequiel Escamilla
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- carolyn from sherman, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
the knob was cracked and the dryer would stay on settings..
pulled the old kob off and examined it and replaced it with the one i ordered...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ellen from Ulysses, KS
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer would not start
We thought the timer was out on the dryer so I was looking for a new timer when I came across a video on your site about replacing a broken timer knob, so I decided to check the knob first and sure enough it was cracked. This video saved me a lot of time and money. Shipment was quick. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis G from Naples, FL
- Parts Used:
- WE25M40
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Holes were not threaded on rear bearing kit
Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howard A. from Little Elm, TX
- Parts Used:
- WD21X10261
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Dishwasher would not start
Took the back off/there were six phillips head screws. Took the protective cover off the Interlock Switches and found the problem. One of the buttons was jambed and would not move. I pulled the switch up and pulled the connecting wires. This took a little bit of doing as the connectors have been set for over 8 years. I used a pair of needle nose pliers. I reconnected the new switch and punched both switches and the washer started. It was an easy repair after that, putting everything back in reverse order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elbert from LAWTEY, FL
- Parts Used:
- WE25M40
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Dryer Squeeky
Watched the video on YouTube and everything went great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Hopatcong, NJ
- Parts Used:
- WE25M40
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Loud screeching noise
I watched video supplied from parts select, only took about 30 minutes, hardest part was putting belt back on, couldn't fit hands in easily, but once I did it, dryer is like new, can't hear a thing.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Oregon, OH
- Parts Used:
- WE25M40
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Loud Squeek When Started until warmed-up
Ordered the recommended parts on-line and they showed up the next day. I followed the on-line repair video that described it all step-by-step.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michell from Bellefontaine, OH
- Parts Used:
- WE25M40
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Loud Sqeaking noise
the replacement part was easy to replace but remembering how the belt went back on took alittle more time..
Was this instruction helpful to you?
Thank you for voting!