PSKS333EB0WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Robert from Riverview, FL
- Parts Used:
- WD21X10261
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The unit would not start.
First I turned off the breaker to the dishwasher. I then removed the bolts that held on the inner cover(note the two small bolts go on the bottom one on each side). I lifted the switch up and disconnected the wire clips from each side. I then put the new switch in place with the wires attached. Then replaced the cover and screwed it into place. Closed the door and flipped the breaker back on and turned the dish washer on and it started up. A very easy replaceable part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LaVerne from Cincinnati, OH
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob was cracked & slipped over settings.
Simply pulled off old Knob and pushed on new Knob. Saved a house call plus repair fee.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Thomasville, NC
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Knob split
Pulled off old knob and clip. Slid on new knob. Thanks PartSelect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rachel from Spring Valley, NY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
the timer knob would not turn on the dryer
Pulled off the knob, saw it was cracked, therefore it was not turning. The small metal part was stuck on the machine bit that the knob fits on so I pulled it off with a plier. Ordered a new timer knob that came with the metal part inside fit it on by hand in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ricky from vero beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
stripped knob
I saw the video and it was just as it was shown!! although there was one gliche....I didn't need pliers!!!It came soooo fast thx PartSelect!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DALE from VANCOUVER, WA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the knob turned but the dryer didn't work
replaced the knob, and the dryer worked.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Angela from Hewitt, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
timer knob on dryer had striped
At first i tried to repair the old knob before ordering one with tape and glue.kind of a mans thing you know and needless to say that didn't work so for a little while the man thing was we would adjust a crescent wrench to fit the shape of the shaft to set our time on the dryer. i looked all over our home depot stores and lowes here in town and no one carried the part. my wife Angela decided to look on line and see if anyone carried a part like this. thanks to you guys we were able to order the part and it came in and while i was at work my wife called me and said the dryer is fixed. she just fit the new knob on the shaft and it works like new. thank you part select you made my wife happy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fawn from Loganville, GA
- Parts Used:
- WE1M1011
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dryer door would no longer shut.
Simply popped the old broken part out and popped the new part into place. I wasn't sure if it was the Latch Door or the Door Strike. Once the parts arrived, it was clear the Door Strike was not the issue.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Emily from Missouri City, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
unable to set the dryer timer
I matched the flat part of the knob to the dryer part and pushed into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sherrilan from North Charleston, SC
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
No problem at all.
I did as the video instruction showed me. I used the pliers and with one pull the metal piece came off and I just put the new knob on it did not take a minute.It was so easy. I am so happy to know that I can get my parts at a great price and do it myself. I have a service plan through my electric company that I pay a fee monthly and if I need services for any appliances there is an additional $25.00 for services and that does not include the part needed to fix my dryer. I ordered my own part with shipping and handling and it still came out less than $25 with no additional fee. I am very satisfied that I now can order parts and do it myself. Thank you PartSelet.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Austin, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastic timer knob broke and spun around freely
I grabbed the broken knob firmly and pulled it straight off. I took the new knob and pressed it firmly into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Oregon, OH
- Parts Used:
- WE25M40
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Loud Squeek When Started until warmed-up
Ordered the recommended parts on-line and they showed up the next day. I followed the on-line repair video that described it all step-by-step.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Hopatcong, NJ
- Parts Used:
- WE25M40
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Loud screeching noise
I watched video supplied from parts select, only took about 30 minutes, hardest part was putting belt back on, couldn't fit hands in easily, but once I did it, dryer is like new, can't hear a thing.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elbert from LAWTEY, FL
- Parts Used:
- WE25M40
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Dryer Squeeky
Watched the video on YouTube and everything went great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis G from Naples, FL
- Parts Used:
- WE25M40
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Holes were not threaded on rear bearing kit
Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.
Was this instruction helpful to you?
Thank you for voting!