DPSF495EW1WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from Williamstown, NJ
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the timer knob on my dryer broke...
I checked the part number on the knob. Found the 1-800 number on a label in the door of the dryer. Called the number and easily ordered the part. The customer service associate that answered my call said it would be here in 3-5 budiness days. To my surprise, it was on my doorstep the next day. I simply placed it where it needed to go and wah-la!! I had a working knob again. My phone call to parts service went very smoothly and delivery was extra speedy!! Very satisfied.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from Island Park, NY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken knob.
It took less than 1 min.Thanks great part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from The Villages, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
part of timer knob that attaches to dryer cracked and would just spin without adjusting setting
Pulled old knob straight off (not attached in any way) and then pushed new knob on to replace. It was that easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maria from Rosedale, MD
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The timer knob cracked
I just had to replace the timer knob after the original cracked after turning it and it cracked. The part arrived the next day even with standard shipping.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Iola from Apollo Beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turned Timer Knob and drier didn't start
Turning the timer on the drier, it felt smooth - no clicking. Rotated to the setting and turned the Start knob - nothing. Pulled the Timer knob off by hand and noticed splits down both sides of the knob. ordered a new knob, pushed it - back in business. Partselect was quick about getting me the replacement part. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rick from Naperville, IL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer Knob Was Broken
Replaced by hand. Took 5 seconds to repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anna from Des Moines, IA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dial knob on dryer was cracked.
First of all when I ordered the part it was easy and the time it took to arrive at my front door was literally a few days... I took the new knob out of the bag and popped it on where the old one use to be... and done... Thanks for an esy fix...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shauna from Bend, OR
- Parts Used:
- WE03X37318
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
High Squeaking noise
I removed the top of the dryer and saw that the top two drum slides where gone and the drum bearing itself was damaged I Temporally placed the parts on the drum bearing until I got the new one, that stopped the squeaking noise. All I needed to do was place the part with the hole on the little hook and then sled the other part in its slot.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Wilmington, NC
- Parts Used:
- WE03X37318
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
High Pitch Sqeaking durng dryer operation
Replaced drum bearing part and white slides.The problem was that it was not the drum slide support. It appears to be the the drum rear bearing of whch I am now ordering. The bearing replacement is a little more difficult, but I have taken this on as a challenge
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Buena Park, CA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
DRYER won't come on.
1st I suspected it's just the timer knob so I ordered the knob. Soon as I was installing the knob it was too loose, when I inspected the timer stem it was also broke. So I ordered a timer. Soon as the timer arrived, I installed the timer and tested the dryer then it came on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from Cumming, GA
- Parts Used:
- WE4M415
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Dryer makes noise when "Start" is pushed, but stops when you let go.
Dryer would turn on when you pushed the "on" button, but as soon as you let go, it would turn off. Found the plastic door switch cracked (from slamming door closed). Unplugged the dryer. Unscrewed the two screws inside the top of the door to unfasten the top panel. Took the top panel off. Then unscrewed the two screws on the side to unlatch the front panel. Used plyers to take the 3 wires off the switch and slid the switch through the front of the door. Juat remember where the wires go. Then inserted new switch and connected the wires. Vacuumed out the dryer and reassembled. It took about 20 minutes and was easy! If I can do it, you can!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RAMCHANDAR from BRISTOW, VA
- Parts Used:
- WE03X37318
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
noisey
TOO EASY to repair. WORKS GREAT>
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kristen from Pasadena, MD
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob would not turn and dryer would not start
Take off the broken knob and snap on the new one. Take's less than 2 minutes. You make need a pair of needle nose pliers.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BIll from Vero Beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Timer knob would not turn as plastic was broken.
Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ezequiel from Las Vegas, NV
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked timer knob
I had found out that reason the timer knob cracked was because the timer switch was turning very tight and caused the knob to crack and realized that dryer also needed a timer switched witch I also ordered from you. I really like how very helpful parts select is with the instructions you send along with the parts I ordered witch will save alot of time. Thanks For your help Ezequiel Escamilla
Was this instruction helpful to you?
Thank you for voting!