DDG8205NC General Electric Dryer - Parts

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

Be very careful to not handle the igniter by its gray part. Hold it by its white tip only.

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

This wheel attaches to the motor.

This knob accepts a D-shaped shaft.

This dryer drum belt goes around the dryer drum and the pulleys to rotate the drum once motor is activate.

This 'K' series three-coil coil kit fits older model GE clothes dryers. It comes with the wiring harness and the igniter bracket.