Models > DC600EXW3 > Instructions

DC600EXW3 Frigidaire Dryer - Instructions

Jump to:

All Instructions for the DC600EXW3
16 - 22 of 22
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Angelique from Metairie, LA
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
The door could not close due to a problem in the latch
I replaced the latch on the body and on the door and it worked very well. I had to watch the video first. Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stacy from East Nassau, NY
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Catch broke
My son kept slamming the door wrong and eventually the catch broke and two and feel out. My husband is the handy man of the family, but has been so busy that I was just duck tapping the door close. Finally, I decided to see if I could look up the part. Found it on here, ordered it, and replaced it all myself! Proud mother right here! Very easy. Works great.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald R from Dalton, GA
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door latch broke
It was super easy ! The part came and I had it done in less than ten minutes. No mechanical skills necessary !
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Hernando, MS
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Door Would Not Close
Inserted clasp in frame of door
Was this instruction helpful to you?
Thank you for voting!
Customer:
jason from Grandview, MO
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
latch assembly popped out partially on door and when it shut it broke the catch on the dryer.
Popped in new catch and used needle nose pliers to squeeze old latch flat and remove from door. New one just popped into place.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lucille from Brookfield, OH
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Plastic Catch broke and door wouldn't close
Another parts website, instructed taking apart the dryer top and front and electrical connections etc. I thought I'd have to buy a new dryer!. Then I found your website, and I was laughing so hard, because your instructions were so simple and logical and took me under a minute to do the "repair". I used a plastic ice scraper instead of a metal putty knife (so as not to scratch the finish) to pry out the broken part. Then using my fingers on one hand I pushed in the new part. I closed the door to make sure the dryer started. It did. The end. Also I was told it would be a couple days till I received the ordered part. It was here in less than 24 hrs. Thank you for your excellent help.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ANDRENNA from MAPLE HILL, NC
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dryer door wouldn't remain closed.
Once I received the product I placed it in the hole and it worked great.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DC600EXW3
16 - 22 of 22