FER341ZAS2 Frigidaire Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Joseph from Philadelphia, PA
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
went to turn the app on and knob broke off and went into the machine
This is a case of not knowing the proper tool to do the job. I went to turn on the machine and the knob broke( common on this machine). The stub of the knob fell into the machine. Thought that the access plate was put on with screws. I saw that the hole was similar to an allen hole. I couldn't get the screws out so called a repairman. He spent 10 minutes, charged me $65 and then told me that most newer appliances need a tool called a robertsons screw driver to get the screws out without stripping them. I felt like a dope, a $4 tool could have saved me $59. A word to the wise, learn what tools do the job and this won't happen to you. JT
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ENIEL from STOCKBRIDGE, GA
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The Washer and Dry knobs were broke
Just push the new knobs on slot. Very simple process. The best part is that it was relatively cheap and the shippping to my home was fast. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nora from Mt. Vernon, OH
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Starter knob broke off the machine
I pulled off the broken knob's metal shaft that remained attached to the operating spindle and slid the knob onto the machine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from sun city, AZ
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knob broke
no problem, pushed the new knob on and all worked as it should.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Millville, NJ
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer knob was missing
Just slipped it on the on-off control, gave it a twist and it was done! Fit perfectly. So glad I found your site.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Rochester, NY
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knob
Just put the the new one on. Parts select was easy to order and fast delivery thanks again.If I ever need a part i will be sure to come back to your site. Thanks so much... Mike Brooks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Madelyn from RIngtown, PA
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The knob broke off and wouldn't turn on.
After receiving the part, I easily replaced it. I didn't need any tools and it took less than 2 minutes to fix. Also, the dryer seems to be working better altogether. Basically, I just inserted the knob where it was before.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kristen from clearfield, UT
- Parts Used:
- 134398300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
broken stem on on/off switch
just unplugged the old one, plugged in the new made sure it worked and put it back together.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary T. from Bunn, NC
- Parts Used:
- 131553900
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
heating element went out
first i had a helper my 9 year old son. we came to this site and read a repair report and we used that to go by.once again my 9year old.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- TERRY from Bowling Green, OH
- Parts Used:
- 131553900
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Dryer wouldn't heat
Removed obvious screws to the vent etc. Then had a little trouble getting the cabinet open. My only problem was getting the front top panel off. A clip about 2" from either side at the top needs to be pushed in with a flat head screwdriver to release the top. Other than that the task was pretty straight forward. Two sets of wires to the heater itself. Used pliers to help pull them loose.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Prince from Murfreesboro, TN
- Parts Used:
- 134844410
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Selector knob broke
Took it out of package..pushed it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Devine, TX
- Parts Used:
- 134503600
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers, Wrench (Adjustable)
Broken belt or wore out !
Got the belt for my little bro's dryer . . . he and a friend tore into it without looking on how to do the job . 2 hours later dryer apart not fixed . . . LoL . . . Next day I get a Call asking me to find a repair manuel . . . I laught and told him to go to Youtube on his phone and the video would tell him how to do it ! He is back up and drying . . . Moral to this story . . . look before you leep !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debbie from Lawrenceville, GA
- Parts Used:
- 134503600
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
Broken dryer belt
My Son-in law did the repair. He removed the top, the front lower panel and finally the front panel with the door. It took a little more time than anticipated because there was not any explicit directions on how much to remove to replace the belt, but he got the job done and put it back together very quickly. Glad I have him to help when needed:).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bryan from Somerville, MA
- Parts Used:
- 131553900
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
no heat but otherwise ran fine
I used the posts on the site to ascertain the problem (fuze or element burnt out). The pictures were very helpful. I pulled the dryer to the floor and using my meter checked both the fuze and the element. The electrical diagrams were very helpful also. I took the dryer apart further to make sure the coil was indeed the problem. I then ordered the part!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Midlothian, VA
- Parts Used:
- 131825900
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
worn bearing
Taking apart cleaning putting back together I don't have any h-t lube so ill be doing it again. Thanks for the part ill be calling again!
Was this instruction helpful to you?
Thank you for voting!