FER231CAS1 Frigidaire Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Eric from Brooklyn, NY
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original knob cracked
Simply slid on the new knob. No tools necessary.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roger from Bossier City, LA
- Parts Used:
- 134503600
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broken belt and idler pulley
Removed top and front of dryer and rear panel. Installed belt and new idler pulley. Reinstalled top and front panel and rear panel. Dryer worked great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- deborah from watertown, NY
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed to replace timer knob
the part came very promptly - I opened the box & took out the knob walked to the dryer & pushed it in place , appreciate the great & honest service thank you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gloria from Murfreesboro, TN
- Parts Used:
- 131825900
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The dryer tub started screeching and then dropped.
Removed the top of the dryer above the dryer door by pulling the pop out plastic holds. I then removed the dryer plug in at the top inside dryer that controls the start when dryer door is closed. I thenremoved the screws that are located at the back of the dryer tub where the bearing is located. I then replaced the support bearing. I just replaced every thing I took off in reverse.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anita from Hartford, CT
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer Knob broke
I simply had to open the plastic and stick the new timer knob on the dryer. It fit perfectly and more importantly, it arrived within 48 hours of me placing my order. Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from Euless, TX
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
original timer knob broken
Just replaced old knob.
Service was great. Ordered knob on Sunday and received new one on Tuesday,
Service was great. Ordered knob on Sunday and received new one on Tuesday,
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jean from Marthasville, MO
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer Knob broke
I am very impressed with Part Select. My part arrived the next day without paying the extra shipping and my husband put the new knob on less than 30 secs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yee-Mei from Ellicott City, MD
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The Time Knob is broken
When the Time Knob broke, I planed to buy a new dryer. My friend told me of this site. I cheched the site and made the order, less than 36 hours, I received the part, less than 1 minute. I replace the knob and it bakc to work. It costs me only $15.
How I love this site!
How I love this site!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ray from auburn, AL
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed replacement knob
Found part through Google, ordered part and received it in three days. Easy as pie
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rhonda from Virginia Beach, VA
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
timer knob broke
Repair was simple and easy. I thought I was going to have to get a new machine.
Thanks
First, I took the new knob out. I slipped it easy on the washing machine.
It was all done.
Thanks
First, I took the new knob out. I slipped it easy on the washing machine.
It was all done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KEITH from WINDER, GA
- Parts Used:
- 134011703
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
renter moved from apartment and left broken timer knob on top of dryer
very very easy to repair .... sled new timer knob on dryer .. no tools needed ......
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ronald from charlotte, NC
- Parts Used:
- 134503600
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
broken belt
I replaced this belt once before but it squeaked for over a year. This belt from Part Select was much better quality and now the dryer works perfectly, no squealing!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Byron from Union City, PA
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken timer knob on dryer
pulled old one off lined up new knob pushed on new one no tools-- less than a minute..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howard from Hope, IN
- Parts Used:
- 134011703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken knob on dryer
Just a matter of taking off the broken knob and replacing it with the new one.
Was this instruction helpful to you?
Thank you for voting!
Squeaking noise as the drum turned
I love technology. First thing I did was google on "U-tube", "How to repair a squeaking dryer". Several videos out there so I just found the one I needed and watched. The repair itself went easy. A word of advice would be to be careful of sharp edges and to remember to unplug the machine prior to repair. While the drum is out, go ahead and get your shop vac and clean the inside of the unit out. Also, not only put grease on the new plastic holder, but put some on the shaft of the idler puller. I also used an awl to line up the holes on the front panel when re-installing the screws. One video I watched showed reaching in through the front to take the drum belt off the pulley, where another showed removing the inspection plate on the back. This made it much easier.
Was this instruction helpful to you?
Thank you for voting!