ADE20L1W Admiral Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Loretta from Manassa, CO
- Parts Used:
- LA-1044
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Dryer won't heat
Contrary to instructions that I found on the web, the element is not accessed through the back. Pop the top of the dryer up and the element is visible in the top of the back . Pretty easy job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marty from Sterling heights, MI
- Parts Used:
- W10410996, 31001465, WP31001344
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Squealing Berring
I had to replace the whole motor, Idler spring and idler Pulley Wheel. It went well but I wish I could have replaced just the berring and not the whole motor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ada from Albion, NY
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint filter mesh had tears on it.
just replaced the part. I was happy how simple it is to order the parts from PartSelect, and be able to get the right measurement needed.plus how fast it came.
Thank You and Keep up the good work. Ada APONTE
Thank You and Keep up the good work. Ada APONTE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from Dysart, IA
- Parts Used:
- WP53-1182
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Dryer would not start
After I unplugged the unit, I used a flat screwdriver to pop the top open at the front, then tipped it back on the hinge. I then used a multi-meter to test resistance through any switch or safety device I could find. The thermal fuse was the hardest one to get to and was the only one that showed open, having no resistance. I had to remove the screw that holds the heating element in place and carefully slide the element out of the way. The fuse is held in place by a metal strip or retainer and it has to be lifted up and right as you remove it. Unplug the wires from the old fuse and put in the new one. Then reverse the order of dis-assembly, plug it in and away you go, as long as that is the only issue, which mine was.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sarah from Cumming, GA
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
tear in old filter
There was no reair needed. We just needed to replace the filter. The new filter arrived in a very short time and now we are drying clothes without losing lint through the dryer vent.
Ordering was easy with just the model and filter number which was listed on the dryer door. I was even given a diagram on the computer screen as to where to locate all the parts numbers needed.
This was a very satisfying order experience!
Ordering was easy with just the model and filter number which was listed on the dryer door. I was even given a diagram on the computer screen as to where to locate all the parts numbers needed.
This was a very satisfying order experience!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julia from Randolph, NJ
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint Screen was cracked.
I threw out the cracked lint screen and put the new one in it's place. I don't know why I waited so long to order the replacement part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lana from Havre, MT
- Parts Used:
- LA-1044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Dryer Wouldn't Heat
Followed the instructions in the video and it was SO easy! Now my dryer works great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KIenny from Bloomington, IN
- Parts Used:
- WP31001529
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old door seal came off and tore up
order knew door seal fix was a snap just Snap in place
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janien from Norwalk, OH
- Parts Used:
- LA-1044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers, Socket set
Very little heat
This repair was so easy. All you need is a 1/4 inch nut driver or straight socket, a pair of needle nose pliers & a flat screwdriver,file or anything flat to pop the top of the dryer open. There are 4 wires to remove and 4 nuts. take the old parts out and replace with the new and replace the wires. Hardest part for me was making sure I didn't drop the nuts.I recommend watching the video. My dryer is working great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Worcester, MA
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The door would not shut
Pushed in the Door Catch, and it was fixed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Festus from Boulder, WY
- Parts Used:
- LA-1044
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Was not heating
It wasnt to bad,its way easy for people with small hands its a tight fit for larger hands that was my only problem.After putting the dryer back in service it still did not heat correctly so I pulled the lint catcher out and the vent hose off the back and blew it out with an air compressor my God what a mess it was plugged bad should have had a fire so please look at doing the same with yours if its an older dryer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from North Windham, CT
- Parts Used:
- WP31001529
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door seal was dry rotted
carefully pulled out old seal, then popped in new seal
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pamela from Little River, KS
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
need new lint filter
I bought from you and received part in timely manner. I got it out of the box and replaced. It's better than the one I got new with dryer. Thanks, P.Blades.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Berkeley, IL
- Parts Used:
- WP53-0918, WP31001529
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer time is very long. Lint not collecting.
I removed the old door seal and installed the new one algining the slots with the inserts and the seals. Old filter out, new filter in. Install was successful but dryer still not drying even though it's producing heat. I guess I will need a replacement.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Kirkland, WA
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
latch broke
Replace with new latch.
Was this instruction helpful to you?
Thank you for voting!