Models > DP6880XLP0 > Instructions

DP6880XLP0 Whirlpool Dishwasher - Instructions

Jump to:

All Instructions for the DP6880XLP0
76 - 90 of 180
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from Jupiter, FL
Parts Used:
4317933
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Worn wheels on lower rack
Removed old wheels, unclipped. Clipped in new wheels.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anthony from CLEVELAND, OH
Parts Used:
WP8066018
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Soap door wouldn't open.
I looked online to see a video. Dad to pop lid off soap dispenser. Slide a plastic part to the left n the spring slide off. Video showed how to place prongs on spring . Then had to lift the upper part of spring to lift onto plastic part of soap dispenser. That was it.

Unfortunately it still doesn't work. I asked Ina email to your company for any suggestions, No reply.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ned from Mauldin, SC
Parts Used:
4317933
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
dry rotted/missing plastic wheels on bottom dish rack
Popped the old ones off and replaced them with the new set. No tools needed. Just clipped the new ones on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kyle from Jonesborough, AL
Parts Used:
675611
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door spring broke
It took longer to take the 2 screws out than it did to put spring on.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harold from GREENVILLE, MI
Parts Used:
4317933
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
all of the old rollers were missing.
the design of the new roller kit was a little different than the original. took a minute to figure the installation. all went well. the new roller assembly fit the 30 year old dish rack
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Walter from KINGSPORT, TN
Parts Used:
675806
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
i had a leak under the dishwasher when the pump turned on.
I replaced the seals per the video instructions.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from St Johnsbury, VT
Parts Used:
W10311986
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
lower rack started to rust through coating
Since there were no printed instructions, we looked at the photo schematic.
Reassembly using the photo was easy by putting the old rack alongside the new one and adjusting the new rack spacing to match the old one.
We also had new wheels which snapped on.
We were delighted to repair and replace this good, older dishwasher rather than purchase a new one!
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from VALPARAISO, FL
Parts Used:
675659
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
water leaks. ordered the door gasket
when removing all the screws from the door gasket the dishwasher door and frame separates making reassembly not possible. you have to leave at least one screw on bottom half on each side, After all that the door would not close. I had to remove the new gasket and put the old one back on.
I need to return the gasket for credit
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Laurence from Sherman Oaks, CA
Parts Used:
4317933
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The rear roller frames became warped & made it hard to put the rack in.
Simply snapped out the old ones and snapped in the new ones. Worked like a charm. Glad you had the parts.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ricker from KESWICK, VA
Parts Used:
675806
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
noisy
watched a video
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Dubuque, IA
Parts Used:
WP8066018
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
soap dish door does not always pop open
the plastic pin that retains the spring has a head on one end that hits a plastic stop on the door to keep it from coming out. I used a small grinder and made a flat spot on the head diameter to make it easy to slide out. This is easier than trying to pry the door off the pin at the two retaing snaps. I was conderned these pin retainer clips were brittle and would break off.
Once the pin is slid out, it is a matter to hold the new spring holes in line with the pin. rotate pin so flat side you ground is turned up, so pin will not move out that way. Tiij about an hour
7 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from BROKEN BOW, NE
Parts Used:
675611
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench (Adjustable)
the left door spring broke, but we were able to use the dishwasher.
I called to order two springs and your salespersons were very helpful. The two springs were sent immediately. my husband pulled out our under-the-counter dishwasher and replaced both springs within 30 minutes
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nicholas from JACKSONVILLE, FL
Parts Used:
W11169039
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Upper dish rack broken tines
Swapped out the old upper dish rack with a new one. A video made the change simple.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
joseph from ENDWELL, NY
Parts Used:
4317933
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Replaced roller assembly with missing rollers with new Tandem Rack Roller
Looked at existing assembly and snapped on new one, duplicating existing installation.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
karen from Galloway, NJ
Parts Used:
675611
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
old spring broken
after figuring out how to position the door the instructions were good
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DP6880XLP0
76 - 90 of 180