Models > IMU38760 > Instructions

IMU38760 Inglis Dishwasher - Instructions

Jump to:

All Instructions for the IMU38760
121 - 135 of 335
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tom from Roanoke, VA
Parts Used:
W11027965
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
My original part was broken. Almost unusable.
Replacement part came. It was broken. I took pics of it, and send the pics and an email to PartSelect. They put another replacement part in the mail on the spot. I was shocked! The 2nd one arrived in perfect condition. BONUS POINT to PartsSelect!
Tom Houser
Roanoke, VA
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Aubrey from BERKELEY LAKE, GA
Parts Used:
675806
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
The Cutter Spring was totally disfigured and pulled apart. Not functional.
Repair went exactly like the video i watched online. Perfect
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
B Jean from MONTPELIER, OH
Parts Used:
WP302711
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
throwed water out under the door
Did not use the new parts. After removing the spray arm, found a screw out of place. Put the seal ring back in place and the screw back in the hole. Machine works like new.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from TEMECULA, CA
Parts Used:
WPW10509257
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
NEW GASKET
I USED A PLUMBER
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donal from SPRINGVILLE, TN
Parts Used:
4318050
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
One door spring broken, replaced both
As described with instructions, removed original "bearing," installed replacement, removed original spring, installed replacement springs. Not difficult.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Walter from KINGSPORT, TN
Parts Used:
675806
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
i had a leak under the dishwasher when the pump turned on.
I replaced the seals per the video instructions.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Louis from CHESTERFIELD, MO
Parts Used:
WP3368999
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Dishwasher would not dispense soap
Both springs (8066018 and 3368999) were replaced as recommended in your troubleshooting guide, but did not resolve the problem. Finally the Dual Motor, 3374501, was replaced. During the above, the plastic face of the door fell off, which created a nuisance task before proceeding to fix the original problem. However, while replacing the motor, I realized the purpose of the two, T-shaped studs sticking out of the motor. It is absolutely necessary that these sit inside the slots which engages the sliding plastic cover, which is spring loaded, in order to engage the release of the soap dispenser door. It was truly a learning experience, but I got it done.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JoAnn from EAST WINDSOR, NJ
Parts Used:
WP8268645
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Wheel assembly was cracked
I just snapped the old one off and snapped the new one on..
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martin from Union Bridge, MD
Parts Used:
WP8268645
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Wheel on lower rack broke.
New one snapped right into place.
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jose from HOUSTON, TX
Parts Used:
WP717273
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Dishwasher Not Heating top rack wet dishes and heating rod looks rusted
It took all of 30 minutes from beginning to end remove the old parts and replaced them and run a diagnostic test before I could wash dishes. The parts were exact and Parts Select has always provided the right parts, shipped fast and never disappointed me.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deb from LAWTON, MI
Parts Used:
WP8565925
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
front track stop broke on both sides of the upper tray
Very simple to repair The front track stops just slide into place, easy. When I looked for these parts this place was the least expensive and the quickest delivery I have ever had. Quick, efficient and friendly online staffing. Thank you, Deb
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Felix from MELBOURNE, FL
Parts Used:
WP8565925
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Timer repairs
Well, it’s very easy to repair. But, what I like if ur Company is, the availability, of the parts.
Thanks you.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mollie from CANTON, NC
Parts Used:
W10586589
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Insulation needed replacing
I searched for the 18x5x5 insulation.,ordered it from Part Select. Waited. Company sent wrong part. Called, they gave me a refund, reordered, promised 2 day free shipping. Waited more than a week, paid for 2 day shipping. Received same, wrong part. Still don't have repair done. Looking elsewhere for part.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
al from Fuquay Varina, NC
Parts Used:
WP8565925
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
Dishwasher circulation pump malfunction
Tipped over washer, removed attachment bolts, installed new pump by clamping water hoses. Be sure to use proper crimping pliers, not the generic slip joint pliers. Replacement pump included required new clamps.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnny from LEVITTOWN, PA
Parts Used:
WP302868
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Lost Screws from lower access covers for my Dishwasher
Reassembled lower access covers using the new screws purchased from parts direct, perfect fit replacement. Hardest part remembering how they fit Dishwasher.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the IMU38760
121 - 135 of 335