Models > HDA965-02 > Instructions

HDA965-02 Hotpoint Dishwasher - Instructions

Jump to:

All Instructions for the HDA965-02
106 - 120 of 145
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Robert from Willcox, AZ
Parts Used:
WD19X10032
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Leaking motor seal
Followed easy instructions and completed repair in less than 30 minutes.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charles from Deming, NM
Parts Used:
WD22X110
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broken lower spray arm hub broke,arm fell off
Remove the retaining screw in the top of the hub and install new hub in reverse.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nathan from Burlington Twp., NJ
Parts Used:
WD26X10013
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
leaky pump
This was really easy. The parts fit perfectly. First i turn off power at circuit panel; turn off water and dissconnected water line and discharge hose. Removed dishwasher from under counter and placed on side. Disconnected connections to motor and pump and replaced and installed same as one unit.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tom from Romoland, CA
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken vent on microwave
Ordered the part and installed...easy and great prices.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from Fort Myers, FL
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lower rack had rusted through in several areas.
Pulled out the old and rolled in the replacement. The easiest part of the repair was ordering from the PartSelect website and receiving it via FedEx Ground the next day. Thank you PartSelect. Even my husband could have been successful with this.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Laura from New York, NY
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing silverware basket
part came in the mail and fit the missing space perfectly. no complaints. easy fix.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from Loganville, GA
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bought a manufactured home
with a dishwasher. Someone had 'packed' the silverware basket and there wasn't one in my dishwasher! Ordered one from here, when it arrived, opened the box, opened the dishwasher and placed it in the correct place. Closed dishwasher - DONE!
Was this instruction helpful to you?
Thank you for voting!
Customer:
FRANCIS from WINOOSKI, VT
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old Basket Broke
Ordered a new basket it was a little large as I ordered the wrong size. I just broke of the tabs that held it in and now its perfect and larger !!!! Simple and great service !!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Corvallis, OR
Parts Used:
WD12X10284
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Old rinse aid fill cap broke off at base
I removed the broken stub of the old fill cap with a screw remover. This was the only part that wasn't easy. The new cap fit fine.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Bradenton, FL
Parts Used:
WD12X10284
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dishes cloudy, spotting
Unscrew old stripped out one and put in new one ..wala!! Easy repair for this old lady...
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leanne from Divide, MT
Parts Used:
WD12X10284
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The rinse aid fill cap was stripped.
I removed the old cap and put on the new cap.
Was this instruction helpful to you?
Thank you for voting!
Customer:
tway from columbia, MO
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replaced dishwasher rack
nothing to it. slid old one out, slid new one in. however, replacement was not the same model as the original.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chuck from Austin, TX
Parts Used:
WD26X10013
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Leaking water
Most difficult part of repair was getting dishwasher out and in under the cabinet. Especially, feeding the copper water line from under the sink and then back while trying to align the connection. Installing the part itself was easy with good instruction for taking it off and reinstalling. However, since the motor had been upgraded, it required new connections. The connections were provided for this, but no instructions for the electrical connections.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ben from Nashville, TN
Parts Used:
WD26X10013
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
replace pump motor assembly
Too easy- what made it easier was this is a portable roll-around unit I could lay on it's back. Loosen the two clamps around the washer pump, hook up the drain solenoid, washer motor wires, attach the motor hanger, that's basically it. It took longer to make sure I was working from the right set of instructions- this pump covers several models. Once I had that right, it was really a snap. Now the unit is so quiet. It once sounded like a jet engine in the kitchen, now it runs so quiet you can hear the water splashing around inside- a big improvement. We should be able to hang onto this thing for a while longer.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from Burns, OR
Parts Used:
WD26X10013, WD15X93
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
dishes not getting clean
I watched and read what other people did with the same problem and bought the part they did and installed the part which was real easy and the dishwasher works great.thank you to everyone that left information.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the HDA965-02
106 - 120 of 145