Models > GSD1000-04 > Instructions

GSD1000-04 Hotpoint Dishwasher - Instructions

Jump to:

All Instructions for the GSD1000-04
121 - 126 of 126
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Clifford from Saint Louis,, MO
Parts Used:
WD28X265
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
multiple rust spots on the old rack
Original part no longer made. Substitute too small by a half an inch. Corrected the problem by removing the 4 corner wheels from the old rack and put them on the new one. Now, it fits and works perfectly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Teddy from Houston, TX
Parts Used:
WD8X228, WD8X227
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dishwasher was leaking behind the door
First open the door and look at the corner tub baffles. They are in the bottom corners where the door seals with the tub and they look alike. Remove and replace one at a time making note of the orientation. Make sure they are firmly seated in the bottom and close the door and enjoy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Novi, MI
Parts Used:
WD12X271
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken clips
Clipped in new wheels and clips
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Parish, NY
Parts Used:
WD8X228, WD8X227
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tub leaking at base of door
Really simple. Remove old corner baffles by just lifting out and replace with new. Close door to insure the door seal aligns with the new baffles and good to go.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bernard from South River, NJ
Parts Used:
WD12X271
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Rear wheels would not clip to the dish rack due to usage and age.
Place the axle inside the wheel. Mount the wheel to the bottom of the dish rack and snap the axle to secure the wheel to the dish rack. Total project time less than 5 min. Video to replace wheel and axle was very helpful for those who are not mechanically inclined.
Was this instruction helpful to you?
Thank you for voting!
Customer:
FRANCIS from WINOOSKI, VT
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old Basket Broke
Ordered a new basket it was a little large as I ordered the wrong size. I just broke of the tabs that held it in and now its perfect and larger !!!! Simple and great service !!!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GSD1000-04
121 - 126 of 126