Models > GMB670E* > Instructions

GMB670E* General Electric Dishwasher - Instructions

Jump to:

All Instructions for the GMB670E*
46 - 60 of 137
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
renee from shelby twp, MI
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
standing water at the bottom of the dishwasher
remove the screen at the back bottom of dishwaser. (4 screws). Unthread piston and and nut assembly for check valve....thread in new one.
Problem solved....no more water $10 part....no repair person !!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LINDY from COLORADO SPRINGS, CO
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Inch Of Clean Water Left In Machine After Each Cycle
First let me say, it's so easy even a caveman can do it. I removed the water out of the bottom. Then I removed the cover in the very back of the machine with a wrench. As soon as I did that, I could see the piston. Next, I twisted the white piston out with my fingers (this was the hardest part). I could see the piston had partially disintigrated. I ordered a new one, had it delivered in a few days, and put it all back in reverse. It took minutes. Thanks to the guy that posted his story, I was able to fix mine for $18.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ohlen from Springfield, SC
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Dishwasher wouldn't drain completely between cycles, causing it to overflow.
First I opened the dishwasher and removed the lower basket. Next I removed the 4 screws that hold the food filter plate in place at the back of the tub. Then I unscrewed the Piston/Check Valve assembly counterclockwise, located at the back center of the tub, by hand. I replaced the old part with the new one and reinstalled the filter plate. I ran a rinse cycle to verify that that all of the water was purged. Finally, I reinstalled the lower basket and resumed using my dishwasher.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Boulder, CO
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Dishwasher wouldn't drain completely
Remove the back filter to access check valve assembly. Twist check valve assembly to remove, not significant deterioration of rubber cap. Install new assembly. Re-install filter. Super-easy and effective!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ernest from Johnson City, NY
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1-2 inches standing water at end of cycle.
Remove shield in rear. Unscrew valve using hand. Screw new valve in place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
joel from Allendale, MI
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Dishwasher would not drain completly after each cycle
removed screen at back of dishwasher from the inside. Twisted piston & nut assembly out by hand and replaced with new one. Very, very simple. Dishwasher works perfectly now.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ALBERT from LYNN, MA
Parts Used:
WD12X10284
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Fill Cap broke off left portion in door
Used drill and easy out to remove broken part, then put in new one
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harry from Franklin, TN
Parts Used:
WD12X10284
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Rinse Aid Fill Cap missing from dishwasher in condo I just bought.
Opened package, removed cap and screwed it in place.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gene from Rocklin, CA
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Dishwasher was not draining completely
Just remove the 4 screws at the lower rear inside the washer to remove screen holder...then unscrew the Piston and Nut Assembly by hand. Put in the new unit, reattach the screen holder with the 4 screws...and the job is done. Probably takes less than 5 minutes....very easy.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ERIN from LAS VEGAS, NV
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Silverware Basket Missing
This is erins dad. She just bought her first home and it was missing the basket. I went online found your company and ordered.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Palm Desert, CA
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced Broken Silverware Basket
Simply took out old and put in new
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RUBEN from KINGWOOD, TX
Parts Used:
WD24X10018
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
diswaher will not drain to empty.
remove bottom tray and rear cover from inside washer.then remove PISTON NUT ASSEMBLY CHECH VALVE by turning it to the left. replaced with new valve assemmbly. IT IS workng like NEW.TOOK ME 30 minutes.VERY EASY!!!!!!!!!!thankyou allfor the help.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
keith from crescent, FL
Parts Used:
WD15X93
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
water valve was bad
very easy like you said
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LuAnne from Fairview Heights, IL
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The dishwasher was missing the silvare basket
Just plopped it in, it fit perfectly! I love it! Very easy to order the part, and very fast shipping! I order it and it took a day to get to me!
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dana from Plano, TX
Parts Used:
WD28X265
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Basket missing from Dishwasher
Just set it in as it was exactly as described and ordered.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GMB670E*
46 - 60 of 137