GSB2800E*119 General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Wendy from Kingman, AZ
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Dishwasher was not draining
I removed the basket in the back of the dishwasher and unscrewed the plastic piece under the basket. I quickly screwed in the new one and now my dishwashe ris working perfectly.. We came so close to buying a new dishwasher and I am so happy I found the website describing this part. THANK YOU!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Om Prakash from Highlands Ranch, CO
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Pool of water at the bottom of the dishwasher after the cycle is complete
It is so easy and simple! Just removed the old part ( Piston and nut assembly), which is at the back of the dishwasher(inside, behind the spray arm and the heating coil) with bare hands. It needs a little push and turn , just like you removing a old stuck nut. One you remove the old nut assembly, replace it with new one. Just hand tightened is enough. Ran the dishwasher and voila...it works like a new one. No more water collection at the bottom! All it took is 10 mins + 12 dollar part + 7 dollar shipping.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Laura from New York, NY
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
missing silverware basket
part came in the mail and fit the missing space perfectly. no complaints. easy fix.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Leanne from Divide, MT
- Parts Used:
- WD12X10284
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The rinse aid fill cap was stripped.
I removed the old cap and put on the new cap.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from Seattle, WA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Dishwasher wasn't draining
After some investigation on the internet and partselect.com, ordered and replaced the piston and nut assembly inside the back of the dishwasher and the problem was fixed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Hopatcong, NJ
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dishwasher not draining completely
This was a piece of cake! Simply removed the rear drain cover with a nut driver and unscrewed the piston from its seat. I noted that the seal in the old piston had deteriorated over time. I rubbed a little petroleum jelly on the upper gasket of the new piston and simply screwed it into place, solving the problem entirely. Could not believe how quickly the part was delivered - next day!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Denver, CO
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Dishwasher won't drain
Removed back screen, screwed out old piece, and replaced. Easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Romoland, CA
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken vent on microwave
Ordered the part and installed...easy and great prices.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Loganville, GA
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bought a manufactured home
with a dishwasher. Someone had 'packed' the silverware basket and there wasn't one in my dishwasher! Ordered one from here, when it arrived, opened the box, opened the dishwasher and placed it in the correct place. Closed dishwasher - DONE!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- tway from columbia, MO
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced dishwasher rack
nothing to it. slid old one out, slid new one in. however, replacement was not the same model as the original.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Macon, GA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Food particles left on dishes after every wash... Piston and Nut Assembly was completely worn out (disolved) and leaking dirty water back into the rack area instead of draining it.
Unscrewed 4 screws from the back, bottom of the rack area which hold the cover. Twist out the old Piston and Nut which is threaded to fit securely (needed some elbow grease to get the old one out). Twist the new part in and place the cover back in place with the 4 screws. Done. Dishwasher works like it was brand new. Cleanest dishes in the country... ;)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Stoughton, MA
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I was very disappointed in the in-the-door silverware basket most dishwashers are equipped with today and longed for the ones that have been phased out.
I went to PartSelect online and easily found an exact duplicate of my old basket at a reasonable price. I ordered it, expecting delivery in about 3 - 5 days. It was on my doorstep 2 days after the order was placed. I opened the dishwasher door, set it in the place of my choice, and what a timesaver! Try it! You'll like it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bradley from Cambridge, WI
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
clips that hold the spinning arm in place broke
whole assembly screws out, replacement was a breeze. I love this site. Parts came quick
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott Allen from Clarklake, MI
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Socket set
Standing Water In The Tub After The Wash Cycle Has Ended, The Problem Is A Worn Or Missing Rubber Seal On The Piston Nut Assembly, It Is Easy To Tell If It Is Indeed This Problem By Feeling The Pump Discharge Line When The Washer Is Draining You Should Be Able To Hear And Feel It Pump The Water Out
Took of the plactic strainer shroud unscrewed the piston nut assembly by hand installed the new one it takes longer to remove the shroud than it does to replace the part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Corvallis, OR
- Parts Used:
- WD12X10284
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Old rinse aid fill cap broke off at base
I removed the broken stub of the old fill cap with a screw remover. This was the only part that wasn't easy. The new cap fit fine.
Was this instruction helpful to you?
Thank you for voting!