Models > ZBD1850N00II > Instructions

ZBD1850N00II General Electric Dishwasher - Instructions

Jump to:

All Instructions for the ZBD1850N00II
16 - 28 of 28
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
CHUCK from CINCINNATI, OH
Parts Used:
WD28X10215, WD13X23417, WD08X10050
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
bottom door gasket replacement/door latch replacement
Need to remove door from hinges to allow to SLIDE gasket thru small lip on door.After using soap and cleaning lip on dishwasher face ,Gasket never feels to grasp lip properly.Identical gasket from old design,just difficult to install.Door latch was also easy to install,BUT LATCH WAS PURCHASED IN LOCKED POSITION.Make sure to roll tumbler in latch ,or it will never lock.
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Inge from ANAHEIM, CA
Parts Used:
WD12X10230, WD12X10222
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
broken upper roller
Turn water and electric off. remove\ dishwasher

take of old roller mount and replace new part

















0
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vivian from RAMSEY, NJ
Parts Used:
WD24X10048, WD01X10322
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Leaking drain hose
Removed leaking drain hose under the dishwasher from drain pump and sink drain pipe. Fed new hose behind dw connected with new clamps to dw drain pump and sink drain pipe. Put in high loop under sink.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CAROL from BUFFALO, NY
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed new silverware basket
took out the old basket and put in the new basket
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Gwinner, WI
Parts Used:
WD12X10221
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Roller wheels wore out.
manual labor.. And a little help from Milwaukee power tools.
4 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from Rocky River, OH
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lower rack wheels kept falling off on right side
Definately purchase all the wheels (8) as they are smaller than original wheels. Buy the wheel with attached stud. Pull off old wheels and pop these on!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nonie H from Kitty Hawk, NC
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the lower rack wheels were breaking
I was able to replace the wheels with the new ones I ordered which are a better design.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Crown Agents USA from Washington, DC
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Wheels Had Fallen Off
The wheels on our bottom tray to our dishwasher had fallen off from a lot of use here in our office. When the wheels arrived, I just simply snapped them back on. A few had to be snapped on tight, but there were no tools necessary. Overall, a very easy fix.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Newark, OH
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Studs had become worn and needed replaced
Removed all wheels, then removed and installed new studs which were designed better than the origional and re-installed. Bottom rack now slides in and out much better.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Danielle from Fort Edward, NY
Parts Used:
WD12X10231, WD12X10230, WD12X10221, WD08X23648
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Seals and Wheels
It was really easy to find the parts in the diagram your website provided. Youtubed the repair instructions....done....thank you very much
Was this instruction helpful to you?
Thank you for voting!
Customer:
Colette from Lakewood Ranch, FL
Parts Used:
WD12X10231
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The wheels were falling off from the bottom rack of my dishwasher.
I ordered 8 wheels, but I really needed just 4.( I am preventing for the future) It was so very simple to place my order and they were delivered in no time. I simply took off the old one, looked at how they were affixed and put the new ones the same way. Less than 2 minutes to do the entire job. I am a "Handy woman".
Was this instruction helpful to you?
Thank you for voting!
Customer:
EUGENE from CENTEREACH, NY
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dishwasher basket worn our and utensils slipped through bottom
1. open dishwasher, 2. roll out bottom dish rack, 3. remove old silverware basket, 4 place new basket in same spot old basket was in, 5. roll bottom dish rack back into dishwasher, 6. close dishwasher door.
Was this instruction helpful to you?
Thank you for voting!
Customer:
J from Johnson City, TN
Parts Used:
WD02X23651
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Rubber gasket for sealing top sprayer arm worn out
The repair piece containing the gasket must be unscrewed and the replacement piece is then screwed into place. Use of a wrench is necessary but used gentle compression as this piece is plastic. Also be careful when starting to thread the piece back on as too much pressure may push the part you are threading it onto out of the back of the dishwasher. ( Note that removing the top rack facilitates the job.. This is done by pushing the locks at the end of the roller tracks in and then to the side, opening the tracks for removal of the rack.)
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ZBD1850N00II
16 - 28 of 28