PNR22LSEFES General Electric Dishwasher - Parts

This basket is part of a silverware basket that has 3 sections. This is the middle section of the basket.

If your dishwasher door will not close or latch, or the machine will not start, you may need to replace the door latch. This genuine OEM replacement latch is meant to keep your dishwasher door closed ...

This water inlet valve is an authentic OEM part for your dishwasher. If can be found behind the lower kickplate panel in either the left or right corner. The valve has a solenoid that opens or closes ...

This part releases the detergent and rinse aid into the dishwasher.

The flood switch in your dishwasher controls the amount of hot and cold water that enters the appliance, ensuring the proper quantity of water to run the cycle. If your dishwasher is over or under fil...

- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146 Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers w...

This genuine OEM bracket is used to secure the dishwasher to your cabinetry. The mounting bracket measures approximately 3 inches in length and is made of metal. If you have a solid-surface countertop...

The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...

This gasket lines the inside cabinet in the dishwasher.

This genuine rinse-aid dispenser cap is an original replacement part from GE, designed for use with GE dishwashers. It covers the rinse agent port and securely seals the dispenser to keep the rinse ai...

This dishwasher retainer connects to the removable tine.

This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...