ZBD1850N03II General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Alice from BLAINE, MN
- Parts Used:
- WD12X10122
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
cap had melted mi
Unscrew the old one and screw in the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from WALSENBURG, CO
- Parts Used:
- WD12X10231
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
two wheels broke off
knocked the broken piece off and snapped the new wheels on - easy breezy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Los Osos, CA
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
holes in dishwasher silverware basket
removed old basket, put new one in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sophie from HOLYOKE, MA
- Parts Used:
- WD12X10286
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Replaced the micro filter
Just tool out the old micro filter and put in the new filter.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CHUCK from CINCINNATI, OH
- Parts Used:
- WD28X10215, WD13X23417, WD08X10050
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
bottom door gasket replacement/door latch replacement
Need to remove door from hinges to allow to SLIDE gasket thru small lip on door.After using soap and cleaning lip on dishwasher face ,Gasket never feels to grasp lip properly.Identical gasket from old design,just difficult to install.Door latch was also easy to install,BUT LATCH WAS PURCHASED IN LOCKED POSITION.Make sure to roll tumbler in latch ,or it will never lock.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from ANN ARBOR, MI
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The basket handle was broken in transit.
I ordered the silverware basket because the original started to separate. The shipment box was damaged and sure enough the handle was broken. The handle can be removed so I replaced the new handle with the old handle, since it was the basket that really needed. Pops off very easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vivian from RAMSEY, NJ
- Parts Used:
- WD24X10048, WD01X10322
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Leaking drain hose
Removed leaking drain hose under the dishwasher from drain pump and sink drain pipe. Fed new hose behind dw connected with new clamps to dw drain pump and sink drain pipe. Put in high loop under sink.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CAROL from BUFFALO, NY
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed new silverware basket
took out the old basket and put in the new basket
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Gwinner, WI
- Parts Used:
- WD12X10221
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Roller wheels wore out.
manual labor.. And a little help from Milwaukee power tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Martha from Kingman, AZ
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rinse Dispenser Cap melted on heating coil
Opened dishwasher after it completed a wash cycle. Found the rinse dispenser cap had come off during the wash and melted on the heating coil at the bottom of the machine. Pulled cap off of coil, made sure coil was not disturbed. Looked in various sites for cap. Finally found this site where I didn't need to order the whole mechanism and could order just the cap. Received the cap, screwed into the dispenser, fixed. The only problem I had was that there were two possible caps so I picked the one that was the same color as the original one. Project completed. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Rocky River, OH
- Parts Used:
- WD12X10231
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rack wheels kept falling off on right side
Definately purchase all the wheels (8) as they are smaller than original wheels. Buy the wheel with attached stud. Pull off old wheels and pop these on!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Calvin from Mankato, MN
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
aid cap melted
Twisted new one in place of old. Disappointed that there was a melting issue at all. Need to investigate problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nonie H from Kitty Hawk, NC
- Parts Used:
- WD12X10231
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the lower rack wheels were breaking
I was able to replace the wheels with the new ones I ordered which are a better design.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Crown Agents USA from Washington, DC
- Parts Used:
- WD12X10231
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels Had Fallen Off
The wheels on our bottom tray to our dishwasher had fallen off from a lot of use here in our office. When the wheels arrived, I just simply snapped them back on. A few had to be snapped on tight, but there were no tools necessary. Overall, a very easy fix.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott from Newark, OH
- Parts Used:
- WD12X10231
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Studs had become worn and needed replaced
Removed all wheels, then removed and installed new studs which were designed better than the origional and re-installed. Bottom rack now slides in and out much better.
Was this instruction helpful to you?
Thank you for voting!