F71C663BD0 Frigidaire Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jeff from Boonton Township, NJ
- Parts Used:
- 5300809611
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Worn out door gasket on dishwasher.
Removed old gasket and clean surfaces on tub and door before installing new gasket. New gasket has a small notch in the middle for top center. Install top then down sides for best results. Door gasket snaps into existing groove so no tools are required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Lake Havasu City, AZ
- Parts Used:
- 5300809611
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Leak at lower door
Took out the old and installed the new and ran the dishwasher, no leak. Problem solved
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Camarillo, CA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower dish rack difficult to pull out to load/unload
Thanks to PartsSelect exploded drawings, it was easy to identify and order the part. Installing was a case of just snapping it on the rack.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Syracuse, NY
- Parts Used:
- 5304507405, 5303943103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Top basket kept falling off the track
Removed the eight rollers that are screwed into the inside of the dishwasher upper section and simply screwed in the eight new ones. Only took about 15 minutes for the job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sherry from Ronan, MT
- Parts Used:
- 5300809703
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Door would not stay up unless locked, springs broken.
Simply remove the bottom panel below the door. The owners manual (22 year old model) showed the proper hole in which to attach the spring. Attach spring to door and then to frame of dishwasher, as illustrated in manual. It is a tight fit to get your hands in there, but once you do it is a snap. We have replace these springs several times over the life of this appliance, this is the first time we have actually found the proper springs, should last a long time. Thank you Parts Select for having the inventory for such an old model!
Was this instruction helpful to you?
Thank you for voting!