F71C663BD0 Frigidaire Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Kevin from Old Orchard Beach, ME
- Parts Used:
- 154106202
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
My dishwasher was leaking from and electrical connection at the heating element
There was an excellent "how to" video on the internet which also pointed me to the part I needed. I did not even remove the dishwasher as recommended. I removed the lower kick plate, removed the power connector at the leaking input, removed the bad nut and installed the new nut.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Hyde Park, MA
- Parts Used:
- 5304507405
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Tub Wheels were worn & broken
Got the parts in a DAY! Wheels were broken and worn causing top tray to slip off runners- new wheels were easy to put in-used the screwsfrom the old ones and banged out the job in about 20 minutes, including letting my son help. Thanks Partselect, you've hooked a new DIY'er (my son)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tony De from Snohomish, WA
- Parts Used:
- 5300809703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken door spring
I only had one break, but bought both to replace. I don't agree with those that say you have to slide the dishwasher out to repair. I simply removed the lower kick plate, and replace the springs in no time. Very easy as was ordering the parts. I will return here for all my appliance parts in the future. Hope I don't actually need any.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from Bristol, RI
- Parts Used:
- 5300809703
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broken Door Counter Balance Springs
Removed lower panel; unmounted fill valve assembly. Installed two springs. Remounted fill valve assembly and reinstaslled the lower panel. Door must be in a near closed position to gain access to the door "L" spring brackets.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from Boise, ID
- Parts Used:
- 5304507405, 5303943103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken tub rack guide wheels
This is a case of weak OEM design. Substantial (cup) weight placed on the rack will ultimately cause these wheels to break under load stress. My fix went slightly beyond the design by installing 8 cents worth of washers between the wheel and the screw head. That way any slack was reduced so that the wheels were less stressed at an angle. The rack now sits square and the wheels more true than design. I picked up some lock washers at local hardware store and flattened them out to fit smooth. The parts supplied by PartSelect were perfect fits to OEM. This is a truly easy repair. If your top rack keeps falling off the guides due to broken tub wheels this will take care of the problem. I will add that the parts that you can obtain through PartSelect are adequate without improvising. I just went for a more robust fix to the original design with additional washers. Hope this is helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Juergen from Shelbyville, IN
- Parts Used:
- 5300809611
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher leaking at the door
Pulled the old gasket ou, cleaned the groove with a cloth. Then pushed the new one in, starting at the bottom. The curvatures are clearly marked, no guesswork.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Houston, TX
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lost several wheels from lower rack of dischwasher
Nothing to it. Just inserted the iron stud into the center wheel and pressed the bracket onto the stud.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Meansville, GA
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Dishwasher leaking from underneath unit
Spotted the source of the leak at the first heating element under the dishwasher. Removed the brass mounting nut and it was cracked. Replaced with new part from PartSelect.com and the leak was fixed. Apparently the heating element gets so hot it tends to crack the mounting nuts, which results in a leak. Delivery time for part said 3-5 days - mine arrived one day after ordered!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matt from Salisbury, NC
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
(leaking) heater element nuts cracked under dishwasher
power off, take off kickplate, unplug 2 wires and unscrew broken nuts, put new nuts on, plug wires back in,(run dishwasher one cycle to make sure no leaks) put kickplate back on, power on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William E from High Point, NC
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Broken heating element brass nut
Ditto the other comments. Easy, great savings. Perfect. Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Highland Park, IL
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Wheels On Lower Dish Rack
Just a littlr snap in the right place and perfection!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Ocean Park, WA
- Parts Used:
- 5304535381
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
upper dishrack would not stay in place
Ordered the new roller assembly and in no time the upper rack was back together, up and running. Now to see about replacing the other two rollers and the side rails as they are showing wear and tear.
Thanks for the quick ship.
Thanks for the quick ship.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Oak Harbor, WA
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
Brass Nut Cracked - Water Leaks O Floor
I removed the 2 screws that hold the dishwasher in place. Slide out the unit just far enough to access the brass nuts on the heating element. Pulled off the wire, and replaced the broken nut with the new nut. Replaced the wire, slide the unit back into place and reattached the 2 under counter screws. Done!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLIAM from KENNESAW, GA
- Parts Used:
- 5304532229
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
wheel missing
2 wheels were missing and I replaced them in 2 seconds. The diagram online was a huge help!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from South Park, PA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
original rack wheels where bent and upper wheels had melted
husband replaced wheels.
Was this instruction helpful to you?
Thank you for voting!