605222851B Frigidaire Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from Longview, WA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken clip would no longer secure wheel
Snapped the new one in. One second repair - like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- robert from Beatty, NV
- Parts Used:
- 5304535768
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old rack wheel assembly rusted and frozen
Simply removed onld rack and threw it away. Slid the new rack in and it fit perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Petersburg, OH
- Parts Used:
- 5304535768
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bottom dishrack was rusting
Pulled out rack out and put new rack in. Replacement took less time than opening the box it was delivered in.
I ordered the rack late Wednesday evening and it arrived Friday afternoon. Excellent service!
I ordered the rack late Wednesday evening and it arrived Friday afternoon. Excellent service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert C from Natrona Heights, PA
- Parts Used:
- 5304535768
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Tips of coating burned of rack
Install new rack assembly
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jonathan from Falls Church, VA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Half the wheels were missing from the lower rack.
So easy it shouldn't even count as a repair, really. The dishwasher, there when I bought the place, had a lower rack that wouldn't roll out as it should. That's because there were no wheels on the left side.
The rack lifts out easily. These wheels snap on to small protrusions from the wire rack.
The rack lifts out easily. These wheels snap on to small protrusions from the wire rack.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Upperco, MD
- Parts Used:
- 154106202
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Small Constant Drip (Leak)
I pulled out the dishwasher removed the two heating element insulated wires and removed both threaded brass nuts and replaced them both. Problem solved. Luckily I have a local parts and repair store with a repairman that knows every part of every appliance ever made (no kidding, I have yet to stump him with a part or question). He did not have the parts, told me to go to partselect.com order two nuts, replace them both at the same time, and fix it myself because its an easy repair and not worth paying hundreds of dollars, if you can use a wrench. He was right, and partselect.com had the right parts, at the right price, easy to find and order, and I can impress the wife with my repair skills. Thanks again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karla from Hickory, NC
- Parts Used:
- 8581548276014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dishwasher leaked around the door
First I pulled out the old gasket, used this to measure for the new gasket, cut to right length, pushed new gasket into the track and washed a load of dishes. No leaks! This took about 2 minutes to complete.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wm from Gurnee, IL
- Parts Used:
- 807145201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
A small knob on the Cover and Stem Assembly broke allowing the lower washer arm to fall off every time the dishwasher cycled.
This is probably the easiest home repair I have ever done! I simply lifted out the screen exposing the Cover and Stem Assembly. It was held on by three screws. I removed the screws and lifted off the old part. (It had been there for over 10 years so I had to push a little to free it.) I then replaced it with the new part and replaced the three screws. It now works fine. One of those home repairs that is so simple but makes it look like you know what you are doing!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Los Angeles, CA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rack got hung up & wouldn't roll
I snapped on the new roller and bingo! problem solved.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vincent from East Stroudsburg, PA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken rack rollers
Two rollers on the lower rack were missing and one was flattened. I popped off the bad roller and snapped the three new rollers in place, all by hand. Took about 60 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Niklas from San Diego, CA
- Parts Used:
- 807145201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
plastic tabs broke
Replaced the part and everything worked fine
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- TIMOTHY from ELBURN, IL
- Parts Used:
- 5304535382
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Old basket had a hole
Lift out old basket replace with new basket
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- FREDERIC from PITTSBORO, NC
- Parts Used:
- 5304535382
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken cutlery holder
open door
place holder in the sliding component
close door
place holder in the sliding component
close door
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Meridena from GROSSE PT PK, MI
- Parts Used:
- 5304535382
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
filter was clogged uo and silverwate basket was damaged
Located a YouTube video and it was easy to remove and clean the filter and install the basket
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David W from Reidsville, NC
- Parts Used:
- 807145201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
My wife noticed the spray arm was not connected.
After removing the 4 torx head screws the cover and stem assembly was removed. The new piece was installed and screws were tightened. That is all it was to it. A very simple repair! Thanks.
D.W.Daniels
D.W.Daniels
Was this instruction helpful to you?
Thank you for voting!