Models > JGD8430ADF > Instructions

JGD8430ADF Jenn-Air Cooktop - Instructions

Jump to:

All Instructions for the JGD8430ADF
91 - 105 of 143
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jacob from Coral Gables, FL
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replace burner knob
with my own two hands, just slip it on--- no story.you folks came through quikly with no complications and deserve a compliment.
18 of 608 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
kim from Pahrump, NV
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
previous owner broke knobs by not pushing down to turn on, then leaving the D rings on when they switched them. Only 1 burner was operating
I carefully pulled the 3 D rings that were left on the posts of the burner controllers with a pair of needle nosed pliers, made sure there was nothing on the controller posts, then put the new knobs on. Make sure there are no D rings on the oven knob posts, 2 of the knobs were fine, they just didn't have D rings in them. Partselect was great. Items were received within 2 days. I would definately recommend them.
18 of 608 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice C. from Breaux Bridge, LA
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Stove Knob Was Split
I removed the split knob and slipped the new knob right on. The knobs look metal but are actually plastic and split over time and use. Really easy to replace. Thanks part select.
Was this instruction helpful to you?
Thank you for voting!
Customer:
WILLIAM from CHESTERFIELD, MO
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Fan knob cracked and would not turn
The identical knob to replace cracked knob, arrived 2 days after I ordered it on line. It was replaced in minutes and we were very pleased to find this available service.
Was this instruction helpful to you?
Thank you for voting!
Customer:
gene from selma, NC
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
base of knobs were cracked
just replaced the knobs and they were a perfect match,can not tell the new from the old ones. thanks for the prompt shipment
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Royse City, TX
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of the burner knobs were loose, could not turn eyes on.
Took off the old knobs, replaced with new ones.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Matthew from Portland, OR
Parts Used:
WP7737P245-60, WP7733P410-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Control know for one burner and fan broke.
Supper easy to replace. Biggest thing is that knobs are not well made and break easily. Better buys some extras.
Was this instruction helpful to you?
Thank you for voting!
Customer:
FRED from Flower Mound, TX
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Former Burner Knob was broken
Pulled old ones off and replaced new ones by pushing them on the spindles. Very easy!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charles from Grenada, MS
Parts Used:
WP7733P410-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burner knobs broken
Lifted upwards on old knobs to remove then aligned new knobs fittings, pressed downward to instal new knobs. Really easy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Geri from Brand Haven, MI
Parts Used:
814323
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
One of the pads on the bottom of the grate kept falling off.
I was able to order the part I needed. The faulty pad had a broken stem.Several pads came in a bag so if I have the problem again I will have the parts on hand. I bought some RTV glue suitable for items at high temperatures; used a probe to make sure the hole in the grate was clear and clean and glued the new pad in place.
Was this instruction helpful to you?
Thank you for voting!
Customer:
KEN from REDDING, CA
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Knob
Take old off and put new on
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jerry W. from Weiser, ID
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken knobs on the drop in range top.
My son that is now in the Army National Guard was rather rough on the knobs for the range. Instead of pushing down and then turning, he would just turn the knobs and broke three of them. I only had one left that would operate all of the burners. I searched all over the local area and could not find any replacements for them. I went to the internet and found your site and the exact knobs I needed to replace the broken ones with. I received the new knobs in the mail and then put them on the range. It is nice to have knobs that actually work and it makes cooking much easier.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Tyngsborough, MA
Parts Used:
814323
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
feet on gas stove top grates were gone
Very simple, cleaned out what was remaining of the old rubber feet and just pushed these in. I didn't bother glueing them in as I didn't feel they would fall out. If they do, I'll go out and obtain the glue that is mentioned by others in this thread. Very satisfied.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from Port Charlotte, FL
Parts Used:
WP7737P245-60
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
cracked knob on stovetop
the cracked knob left the round piece of metal that is part of the knob inside the stovetop, preventing the new knob from being installed at the right height. We were able to remove the metal piece and place the new knob on at the correct height. We were very pleased at how fast the part was received.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Helga from Litchfield Park, AZ
Parts Used:
WP7737P245-60
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Broken PLASTIC Burner Knobs
My mother is a great cook that is always in a hurry ... and I know that she is not always pushing those plastic knobs DOWN before turning them. Frustrated with reordering these expensive plastic knobs,I decided to get smart. I reordered 6 knobs (this is the 3rd time in 2 years). These knobs are designed to break. I decided to reinforce the plastic that goes around the knob shafts. At first, I thought about using some rigid metal bird bands like on a parrot. I second thought that this would be too difficult to find the perfect size to fit the outside diameter of the knob, so I decided to buy slightly smaller diameter, tightly coiled, sturdy, steel springs to fit around the plastic that fits onto the shafts. I manipulated each spring to become slightly larger to fit over the plastic by twisting the spring in the direction of uncoiling it. Not permanently unbending it, but just enough to make it grow in diameter to fit around the outside. I clipped the excess wire from the spring with wire cutters and reinforcerd everything with a coat of good strong epoxy . It seems that the metal spring and epoxy bonded to the knob became SOLID AS A ROCK. I figured, if the plastic can't split from the D- SHAPED shaft, then we have a knob that is as good as if it were made out of metal.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JGD8430ADF
91 - 105 of 143