JED8430BDS Jenn-Air Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- alphonso from plainfield, IL
- Parts Used:
- WP71003558
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
blower motor was making loud noise
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roberto from Zapata, TX
- Parts Used:
- 71003476
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Wrench set
Fan not working
Opened the top section of the stove. Re-routed wires to be connected from the speed control device into the new cord. And done. Put everything back thogether.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rita from Leesburg, VA
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace old grease filter
very easy slip in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from Cottontown, TN
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Nasty, clogged, old grease filter
I carefully removed the disgusting old filter and took straight to trash. I then used my wet/dry vacuum to clean the rest of the loose debris from the area where the filter area is located. I used a clean, dry cloth to wipe the remainder of the material away and then carefully lowered the clean new filter down into it's new home. So easy, it took longer to type out these directions :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dewey from Wilson, NC
- Parts Used:
- WP74009254
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Fan Control Switch stopped working
Looked up the part on the internet. Found it with ease. The thing I did miss was that the switch had a small nub to keep it in the right place in the Glass top. The repair went easy. Probably took no more than 15 minutes. I would use PartSelect again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eddie from Loyall, KY
- Parts Used:
- W11088181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Water boiled over burnt out switch
Knocked breaker removed stove top from iland removed a dozen screws replaced switch put screws back in installed top back in iland put breaker back in worked purfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- larry from houston, TX
- Parts Used:
- W11088181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
burner switch broken
turned off power to stove top..lifted unit out unscrewed top and switch had 2 screws re-placed switch and put back together.. make easy $100 plus switch
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenda from Council, ID
- Parts Used:
- WPY706012, WP74010839
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The knobs were broken.
Took off the old one, put all new ones on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Allen from Winchester, TN
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Replace broken fan knob
Only had to get long-nosed pliers to pull remains of broken knob from cavity. New knob was easy push-on and repair was completed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Long Beach, WA
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Fan swith poped out -couldn't replace it
Ordered new part--on line help said pull all remaining parts out--small pair of plyers and yanked internal parts out--the new part just slipped down over the u-post and back in business--couldn't have been easier
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Gurnee, IL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yulanda from Fairburn, GA
- Parts Used:
- WP74010839
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replacement of broken knobs
open packaging and placed knobs on stems of the cooktop.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Lady Lake, AL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new grease filter
The old grease filter was removed and the entire downdraft was cleaned. The new filter was slipped in. It is so nice to have the old one out. I am so appreciative of finding this part. :-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Newburgh, IN
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original fan knob was broken
Repair was simple thanks to feedback from this site.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Meredith from Scottsdale, AZ
- Parts Used:
- WP74010839
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Heat from cookware melts the finish on knobs.
Remove existing knob by pulling straight up noting direction of indexing mark. Replace with new knob by aligning index mark and pushing straight down. Presto...done!
Was this instruction helpful to you?
Thank you for voting!