JED8230ADS16 Jenn-Air Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Rebecca from Broadway, NC
- Parts Used:
- WPY708730
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
one side of cooktop did not work
I took out the side of the cooktop that did not work. I had to take off the bottom of the cooktop and checked where electricity was going and not going. Once I found the part that needed replacing, I went on the website, search for Jen-Air cooktops and model number. From the sketch on the website, I was able to order the part needed. I decided to get 2 in order to replace both parts at one time, just in case. The part arrived quickly and was easy to install. The most time I spent was taking the backside off the cooktop and cleaning it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Mission Viejo, CA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
2 top burners went out
I just removed the old cartridge and replaced with the new one--that easy! Thank you so much
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from Atlantic Beach, FL
- Parts Used:
- JEA8120ADW
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My old coil elements were too hard to keep clean
I pulled out the old coil cartridges and inserted the new radiant element cartridges.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from Mount GIlead, OH
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Changed out Element
First i lifted the old cartridge out then i put the new one in and turned it on and it worked fabulously.
took no more than 30 seconds
took no more than 30 seconds
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from Spring, TX
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heat elements quit working
I unplugged the old unit and plugged in the new unit. Done in less than 1 minute. It took more time to open the shipping box.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daryl from Olathe, KS
- Parts Used:
- Y708572
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers
cook top module would not heat.
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black. When the contact spades arrived, I replaced the contact spades and reassembled the module. It now works and looks like it did when it was new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Morris from Yazoo City, MS
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
my wife wanted matching coil elements.
removed grill cartridge and replaced it with the new coil element cartridge.
It was like having a brand new range.
Thank you for your fast and reasonable service.
YOU WILL ALWAYS HAVE MY BUSINESS!
It was like having a brand new range.
Thank you for your fast and reasonable service.
YOU WILL ALWAYS HAVE MY BUSINESS!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Palo Alto, CA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
We are renting a house with a stove that only had two burners on one side and a grill element on the other. We needed four burners.
This was an extremely simple repair. No screws, no nothing. If you can plug in a lamp, you can swap out this part just as easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from Ledyard, CT
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace element cartridge
I placed my order online and received the replacement parts the very next day - thank you so much!!
The hardest part of this repair job was removing it from the boxes! Pulling out the old cartridge and inserting the new was as easy as could be!
The hardest part of this repair job was removing it from the boxes! Pulling out the old cartridge and inserting the new was as easy as could be!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Fair Play, SC
- Parts Used:
- JEA8120ADW
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
We Wanted To Update The Kitchen
Openning the box was the most time consuming and difficult part of the install. The actual replacement took less than a minute for each unit. It was plug in and ready to cook. Lifted the old unit up and out and the new ones slid right in. It looks like a new stove top now. P. S. Delivery was very fast!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Horacio from Laredo, TX
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The Burners on the stove stopped working
I was told that we needed a new stove at an estimated cost of $3900. I decided to google the parts that were not working after I was able to identify the Part number & model. I was first advised to look at Lowes, which I did and was not successful. I did another web search the Part Select site came up. At first I was able to find the part, but the color. A simple phone call and a helpful (Human) voice at the other end gave me a new model number and in less than 5 minutes I had made my order. Total cost $368.00 including shipping and handling. My stove is working like new. Total savings $3500 and change. Satisfaction 100%. I have placed the web site in the must have category.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Holbrook, NY
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heating coils (burners) were not working
when the new cartridges came in all I did was unplug the old and plug in the new and I had a new stove
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Crysta Lake, IL
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed to replace the old burner cartridges
1. Lifted out the old burner cartridges
2. Opened the box from PartSelect
3. Inserted the new burner cartridges
It's plug and play. No tools required !
2. Opened the box from PartSelect
3. Inserted the new burner cartridges
It's plug and play. No tools required !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ronald from ESTERO, FL
- Parts Used:
- WP5700M611-60
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
drain jar lids rusted and broken of their mounts
The lids are fastened to the underside of the unit by rivets....3 to each lid.
I used a cordless drill and small drill bit to drill through the rivets to remove the old lids and remains of the rivets.
The new lids are easily fastened back using a rivet gun ( about $20 in Lowes) using small 1/8th aluminum rivets.
No real problems.
1 thing to note is that the drill bit will pass through the old rivet by about 1/4 inch before it comes up against the upper level of the BBQ floor so do not drill any deeper.The aluminum rivets are easy to drill through and you will easily feel when the rivet is drilled through.
I used a cordless drill and small drill bit to drill through the rivets to remove the old lids and remains of the rivets.
The new lids are easily fastened back using a rivet gun ( about $20 in Lowes) using small 1/8th aluminum rivets.
No real problems.
1 thing to note is that the drill bit will pass through the old rivet by about 1/4 inch before it comes up against the upper level of the BBQ floor so do not drill any deeper.The aluminum rivets are easy to drill through and you will easily feel when the rivet is drilled through.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Frederick, MD
- Parts Used:
- WP5700M426-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the element plugged in, stove was woking right away.
The element plugged in to the cook- top.The cook -top was working moments after i unpacked the element. thank you.
Jim B.
Jim B.
Was this instruction helpful to you?
Thank you for voting!